2022 Realistic PD1-001 Dumps Exam Tips Test Pdf Exam Material
Powerful PD1-001 PDF Dumps for PD1-001 Questions
NEW QUESTION 124
Which of the following settings should a technician change if communication response is unusually slow between a workstation and a printer?
- A. Subnet mask settings
- B. SMB settings
- C. TCP/IP port settings
- D. Half Duplex/full duplex settings
Answer: D
NEW QUESTION 125
Which of the following are types of physical ports on printers? (Select TWO).
- A. RAW
- B. SMB
- C. USB
- D. LPR
- E. LPT
Answer: C,E
NEW QUESTION 126
Lines running from lead to trail edge of received faxes would indicate a problem with the:
- A. transmitting machines transfer section.
- B. receiving machines scanner section.
- C. transmitting machines charge section.
- D. receiving machines fuser section.
Answer: D
NEW QUESTION 127
A magnetic roller is used in which of the following components?
- A. Transfer unit
- B. Laser unit
- C. Fuser unit
- D. Developer unit
Answer: D
NEW QUESTION 128
After installing a printer driver, which of the following is the BEST way to confirm basic printing functionality?
- A. Display the printers embedded web server
- B. PING the printer
- C. Print the driver test page
- D. Print a document from a word processing application
Answer: C
NEW QUESTION 129
Which of the fol owing multimeter settings should be used to measure source voltage at the wall outlet?
- A. AC voltage
- B. Resistance
- C. Diode check
- D. DC voltage
Answer: A
NEW QUESTION 130
When arriving at the customers location, two different users describe the problem, and from their description it seems to be two separate problems. Which of the following is an appropriate step to take?
- A. Set up a separate call for each problem.
- B. Have them duplicate the problem at the device.
- C. Ask a third person and see if the problem is the same thing.
- D. Ignore both of them and decide what the real problem is.
Answer: B
NEW QUESTION 131
When installing an MFD, it is recommended to also install a single outlet dedicated surge suppressor in order to:
- A. prevent the device from causing electrical surges.
- B. reduce service calls relating to power related issues.
- C. prevent users from being injured.
- D. to control static electricity.
Answer: B
NEW QUESTION 132
Toner is attracted to the photoconductor during which of the following stages of the print process?
- A. Writing
- B. Transfer
- C. Fusing
- D. Developing
Answer: D
NEW QUESTION 133
A technician suspects there is intermittent noise on the power source outlet. Which of the following would be used to run a prolonged test?
- A. AC Line Monitor
- B. Multimeter
- C. Polarity Tester
- D. Volt Meter
Answer: A
NEW QUESTION 134
Which of the following steps occurs immediately after the writing process?
- A. Charging
- B. Transfer
- C. Fusing
- D. Developing
Answer: D
NEW QUESTION 135
Which of the following BEST describes the purpose of the separator pad?
- A. To feed envelopes
- B. To reduce wear on the motor
- C. To reduce multi-sheet feeding
- D. To improve copy quality
Answer: C
NEW QUESTION 136
Which of the following is the typical reason for installing a Hard Drive to the scanner section of an MFP?
- A. To enable the negative image scanning feature on the MFP.
- B. To increase the color gamut of the scanner.
- C. To increase the amount of images that can be scanned into memory.
- D. To enable the image compression feature on the MFP.
Answer: C
NEW QUESTION 137
A customer bought a SuperG3 high speed fax machine to send reports to the corporate office. The activity report shows it only communicates at 9.6Kbps to the corporate office. Which of the following should a technician recommend?
- A. SuperG3 may display as V.17 on the print-out.
- B. Try to send the faxes after hours and see if the line speeds up.
- C. The distant machine must also have SuperG3 capability.
- D. Send the faxes on memory transmission.
Answer: C
NEW QUESTION 138
A customer mentions that the text in a scanned file is jagged and hard to read. Which of the following settings can provide the GREATEST improvement in image quality for this symptom?
- A. File format
- B. Resolution
- C. Bit depth
- D. Compression
Answer: B
NEW QUESTION 139
A customer recently purchased a MFD and would like to setup scan using their SMTP server.
Which of the following type of scanning would be configured for the customer?
- A. Scan-to-FTP
- B. Scan-to-folder
- C. TWAIN scanning
- D. Scan-to-email
Answer: D
NEW QUESTION 140
A customer needs to reduce the file size of scanned images because they are running low on available hard drive space. Which of the fol owing practices will reduce the size of a scanned image?
- A. Reduce the scan resolution setting
- B. Scan directly from the glass instead of using the ADF
- C. Save as a TIFF file
- D. Save as a BMP file
Answer: A
NEW QUESTION 141
A customer has replaced an older printer with a new MFP; however, the features on the new MFP are unavailable to the print users, even though they can stil print. Which of the following steps needs to be taken to make the new features available?
- A. Reinstall the old unit; the MFP is not compatible with their system.
- B. Install the print driver for the new MFP.
- C. Reformat the PCs so they can see the new MFP.
- D. Update the MFPs firmware to the newest version
Answer: B
NEW QUESTION 142
Which of the following is the purpose of the ESD wrist strap?
- A. Protect the technician from shock
- B. Protect the device from vibrations
- C. Prevent damage to the toner
- D. Prevent damage to solid state components
Answer: D
NEW QUESTION 143
Which of the following is the purpose of the thermistor in the fuser assembly?
- A. To detect the temperature for the fuser assembly.
- B. To prevent premature deterioration of the fuser assembly.
- C. To detect the pressure for the fuser assembly.
- D. To provide overheat protection for the fuser assembly.
Answer: A
NEW QUESTION 144
How many mirrors can be found in MOST scanner units that contain a CCD?
- A. 0
- B. One
- C. 1
- D. 2
Answer: A
NEW QUESTION 145
Which of the following type of jack is used for a fax line?
- A. RJ-44
- B. RJ-13
- C. RJ-11
- D. RJ-45
Answer: C
NEW QUESTION 146
Which of the following utilities could be used to determine a subnet mask?
- A. NSLOOKUP
- B. PING
- C. TRACERT
- D. IPCONFIG
Answer: D
NEW QUESTION 147
A customer has a deadline to print a large job and their printer requires parts which will not arrive in time. They are very frustrated with the technician and the printer. Which of the following is the BEST response?
- A. Explain that there are other customers who also need attention and the schedule cannot be changed.
- B. Explain there is nothing else that can be done and the customer wil have to deal with it.
- C. Empathize with the customers situation and suggest rerouting this job in order to meet the deadline.
- D. Explain the part wil be arriving the next day and the unit will be serviced at that time.
Answer: C
NEW QUESTION 148
Electromagnetic clutches require periodic:
- A. lubrication.
- B. rotation.
- C. replacement.
- D. adjustment.
Answer: C
NEW QUESTION 149
......
Guaranteed Accomplishment with Newest Oct-2022 FREE: https://www.passcollection.com/PD1-001_real-exams.html
