UPDATED [2024] Pass VMware 5V0-31.22 Exam in First Attempt Guaranteed [Q69-Q94]

UPDATED [2024] Pass VMware 5V0-31.22 Exam in First Attempt Guaranteed

Pass 5V0-31.22 Exam Latest Practice Questions

VMware 5V0-31.22 exam is one of the most sought-after certifications in the IT industry today. VMware Cloud Foundation Specialist (v2) certification is ideal for professionals who are interested in building a career in cloud computing and virtualization. 5V0-31.22 exam covers a wide range of topics, including VMware Cloud Foundation architecture, design, deployment, and management. It also covers topics such as vSphere, vSAN, NSX, and vRealize Suite, which are essential components of VMware Cloud Foundation.

 

NEW QUESTION # 69
An architect is tasked with deploying a new VI Workload Domain cluster to support the HR system. The default storage policy must satisfy the following requirements:
* Support two host failures
* Use the least amount of hosts
* Maximize user capacity
Which configuration will satisfy these requirements?

• A. 5 Hosts, FFT=2. RAID 5/6
• B. 4 Hosts, FTT=2, RAID 1
• C. 5 Hosts, FFT=2, RAID 1
• D. 4 Hosts, FFT=2, RAID 5/6

Answer: D

Explanation:
Explanation
The requirements are to support two host failures, use the least amount of hosts, and maximize user capacity.
RAID 5/6 and RAID 1 are both suitable options for a storage policy that can support two host failures.
However, RAID 5/6 will be more efficient in terms of space utilization, allowing for a larger user capacity. In addition, the use of four hosts instead of five will minimize the number of hosts required, reducing costs associated with hardware and licensing.
According to VMware vSAN Design and sizing guide, the Failure to Tolerate (FTT) policy defines the number of replicas that must be kept for each object. In this case, FTT=2 means that two replicas of each object will be created. FTT=2 provides protection against the failure of two hosts. The Failure to Tolerate for the capacity tier (FFT) policy defines the number of parity fragments that must be kept for each stripe. RAID 5/6 requires FFT=1, which means that one parity fragment will be created for each stripe.
Therefore, the best answer is A. 4 Hosts, FFT=2, RAID 5/6.
https://vmc.techzone.vmware.com/vmc-arch/docs/storage/vmc-aws-vsan-architecture To support two host failures (FTT=2), a minimum of four hosts is required. RAID 5/6 erasure coding can be used to maximize user capacity while using the least amount of hosts. Thisconfiguration will satisfy all three requirements: supporting two host failures, using the least amount of hosts, and maximizing user capacity.

NEW QUESTION # 70
A customer purchased six new HPE ProLiant DL380 Gen10 hosts and is interested in deploying a VCF infrastructure that will coexist with the current VMware on AWS cloud DR solution in a hybrid model.
The architect suggests the VCF architecture that will help the customer run the workloads while offering workload isolation.
Which VCF architecture was suggested for this customer?

• A. node management domain and 3-node VI workload domain in a VCF standard model, while leveraging resource pools
• B. node management/workload domain in a VCF consolidated model, while leveraging resource pools
• C. 3-node management domain and 3-node VI workload domain in a VCF standard model
• D. node management/workload domain in a VCF consolidated model

Answer: C

Explanation:
Explanation
This is because according to VMware documentation , VCF supports two architecture models - standard and consolidated. The standard architecture model separates management workloads and user workloads into different domains, while the consolidated architecture model combines them into one domain. For a hybrid model that coexists with VMware on AWS cloud DR solution, the standard architecture model is recommended as it provides workload isolation and mobility across VCF instances6. The minimum requirement for creating a management domain or a VI workload domain is three hosts45.

NEW QUESTION # 71
During a VCF design workshop, the architect gathered the following customer requirements:
* There must be two environments: PROD and DEV.
* PROD and DEV should be administratively separated.
* PROD will use two different hardware server types, and DEV will only use one hardware server type.
* The VCF infrastructure design should be flexible and scalable as much as possible How many NSX local managers in total will be provisioned after deploying the full VCF infrastructure?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

Explanation:
Explanation
According to the VMware documentation, each NSX-T Local Manager is associated with a vCenter Server, and each NSX-T Local Manager can manage up to three vCenters. In a VCF deployment with two environments (PROD and DEV) and two different hardware server types in PROD, there would be a total of three vCenter Servers. Therefore, a total of three NSX-T Local Managers would be provisioned to manage the three vCenter Servers.

NEW QUESTION # 72
An administrator is tasked with enabling workload management for a VMware Cloud Foundation Management Workload Domain. This set of requirements was collected during the design workshops:
* Developers should be able to utilize vSphere Pods feature.
* Embedded harbor registry feature should be supported.
* Developers need to utilize persistent volumes across multiple provisioned vSphere Pods.
Which three actions will meet the requirements for this deployment? (Choose three.)

• A. Configure HA Proxy.
• B. Enable vSphere HA and DRS in partially-automated mode.
• C. Enable vSAN File Services.
• D. Configure NSX-T Networking.
• E. Configure NSX Advanced Load Balancer.
• F. Enable vSphere HA and DRS in fully-automated mode

Answer: C,D,F

Explanation:
This is because according to VMware documentation2, these are some of the prerequisites for enabling workload management for a VMware Cloud Foundation Management Workload Domain:
You must have a vSphere cluster with NSX-T networking configured.
You must have vSAN File Services enabled on your cluster.
You must have vSphere HA and DRS enabled in fully automated mode on your cluster.
The other options are incorrect because they are not required or supported for this deployment.
https://docs.vmware.com/en/VMware-Harbor-Registry/services/vmware-harbor-registry/GUID-index.html

NEW QUESTION # 73
An administrator is tasked with deploying a VMware Cloud Foundation environment that consists of three VI Workload Domains. Each VI Workload Domain is comprised of two clusters, with 18 hosts in each cluster.
Which option fulfills this requirement while minimizing the number of NSX-T Manager instances?

• A. Deploy one large-sized NSX-T Manager cluster per VI Workload Domain.
• B. Deploy one large-sized NSX-T Manager cluster for all VI Workload Domains.
• C. Deploy one medium-sized NSX-T Manager cluster per VI Workload Domain
• D. Deploy one medium-sized NSX-T Manager cluster for all VI Workload Domains.

Answer: D

Explanation:
Explanation
According to NSX Manager VM and Host Transport Node System Requirements23, an NSX-T management cluster formed using a medium-sized appliance can support up to 128 hypervisors. Since each VI Workload Domain has 36 hosts (18 x 2), and there are three VI Workload Domains, the total number of hosts is 108 (36 x 3), which is within the limit of a medium-sized NSX-T Manager cluster.

NEW QUESTION # 74
What is a supported function of the vSphere Lifecycle Manager (LCM) in VMware Cloud Foundation (VCF)?

• A. Downgrade VM hardware version
• B. Upgrade vCenter Server
• C. Check hardware compatibility of hosts and clusters
• D. Upgrade SDDC Manager

Answer: C

Explanation:
12-29 vSphere Lifecycle Manager Baselines and Images
You use vSphere Lifecycle Manager baselines and baseline groups to perform the following tasks:
* Upgrade and patch ESXi hosts. *
Install and update third-party software on ESXi hosts.
You use vSphere Lifecycle Manager images to perform the following tasks: * Install the desired ESXi version. * Install and update third-party software on ESXi hosts in a cluster.
* Update and upgrade the ESXi version in a cluster. * Update ESXi host firmware in a cluster. * Generate and use a recommended image for your cluster. * Check the hardware compatibility of hosts and clusters.
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-lifecycle-manager/GUID-8883AEB4-F740-4B6B-8A44-55AA999B4089.html A supported function of the vSphere Lifecycle Manager (LCM) in VMware Cloud Foundation (VCF) is to check hardware compatibility of hosts and clusters. This function allows you to verify that the hosts and clusters in your VCF environment meet the requirements for the desired state image that you want to apply. You can also view the compatibility status and details of each host and cluster in the SDDC Manager dashboard1.

NEW QUESTION # 75
A systems administrator is tasked to deploy VMware Cloud Foundation (VCF) and has already deployed the VMware Cloud Builder appliance.
What is the next step the systems administrator should take?

• A. Configure the Management Domain using custom certificates.
• B. Prepare and configure the ESXi hosts to be used in the deployment.
• C. Deploy the Management Domain using VMware Cloud Builder.
• D. Upload the Deployment Parameter Workbook.

Answer: D

Explanation:
Explanation
after deploying the VMware Cloud Builder appliance, the next step a systems administrator should take when deploying VMware Cloud Foundation (VCF) is Option D: Upload the Deployment Parameter Workbook 1
. After uploading and validating the deployment parameter workbook, you can perform bring-up of the management domain 1.
According to the VMware Cloud Foundation documentation, after deploying the VMware Cloud Builder appliance, the next step is to create a deployment parameter workbook that defines the parameters required for the deployment. This workbook can be created manually or generated using the VMware Cloud Foundation Deployment Parameter Workbook Generator tool. Oncethe workbook is created, it must be uploaded to the VMware Cloud Builder appliance before deploying the Management Domain [1].
Therefore, the correct sequence of steps would be:
* Deploy the VMware Cloud Builder appliance
* Create or generate the Deployment Parameter Workbook
* Upload the Deployment Parameter Workbook to the VMware Cloud Builder appliance
* Deploy the Management Domain using VMware Cloud Builder.

NEW QUESTION # 76
What is required as part of enabling the Harbor Image Registry?

• A. Tanzu Enabled Cluster
• B. Storage Policy
• C. Resource Limits
• D. Access Control

Answer: B

Explanation:
Explanation
This is because according to Dell documentation , to enable the Harbor Image Registry, you need to select the VM Storage Policy that will be used to store the images.
As part of enabling the Harbor Image Registry in VMware Cloud Foundation, a storage policy needs to be defined to specify the storage requirements for the registry. The storage policy should define the storage characteristics for the datastores where the registry will be deployed, including the redundancy level, disk type, and disk space. This is documented in the VMware documentation titled "Enabling Harbor Image Registry in Workload Domains."

NEW QUESTION # 77
An administrator is tasked with enabling workload management for a VMware Cloud Foundation Management Workload Domain. This set of requirements was collected during the design workshops:
* Developers should be able to utilize vSphere Pods feature.
* Embedded harbor registry feature should be supported.
* Developers need to utilize persistent volumes across multiple provisioned vSphere Pods.
Which three actions will meet the requirements for this deployment? (Choose three.)

• A. Configure HA Proxy.
• B. Enable vSphere HA and DRS in partially-automated mode.
• C. Enable vSAN File Services.
• D. Configure NSX-T Networking.
• E. Configure NSX Advanced Load Balancer.
• F. Enable vSphere HA and DRS in fully-automated mode

Answer: C,D,F

Explanation:
Explanation
This is because according to VMware documentation , these are some of the prerequisites for enabling workload management for a VMware Cloud Foundation Management Workload Domain:
* You must have a vSphere cluster with NSX-T networking configured.
* You must have vSAN File Services enabled on your cluster.
* You must have vSphere HA and DRS enabled in fully automated mode on your cluster.
The other options are incorrect because they are not required or supported for this deployment.
https://docs.vmware.com/en/VMware-Harbor-Registry/services/vmware-harbor-registry/GUID-index.html

NEW QUESTION # 78
An administrator is tasked with resetting a root password which has expired for one of the Workspace One Access (WSA) cluster nodes. The administrator has already reset the password directly on the WSA cluster node(s).
Which additional step must the administrator take to update the password in the SDDC Manager database?

• A. Manually change the password in SDDC Manager using the "Update" button.
• B. Remediate the password in SDDC Manager using the "Remediate" button.
• C. Schedule the password rotation in SDDC Manager in the next five minutes using the "Schedule Rotation" button.
• D. Rotate the password in SDDC Manager using the "Rotate Now" button.

Answer: B

Explanation:
You should remediate the password. That option is used to sync password that were changed directly on component product managed by SDDC manager. https://docs.vmware.com/en/VMware-Cloud-Foundation/5.0/vcf-admin/GUID-92E16E2F-9053-4BBA-9BF9-7B5065C680CF.html According to the VMware Cloud Foundation documentation1, if you change the password of a service directly on the service node, you must remediate the password in SDDC Manager to update the password in the SDDC Manager database. This ensures that SDDC Manager can continue to manage the service and perform operations such as patching and upgrading. To remediate the password, you need to select the service from the Password Rotation page, click Remediate, and enter the new password.
Manually changing the password in SDDC Manager using the "Update" button is not a valid option, because there is no such button on the Password Rotation page. The only buttons available are Rotate Now, Schedule Rotation, and Remediate1 Scheduling the password rotation in SDDC Manager in the next five minutes using the "Schedule Rotation" button is not a recommended option, because it will change the password again and may cause service disruption. The Schedule Rotation button allows you to set a date and time for rotating the passwords of one or more services automatically1 Rotating the password in SDDC Manager using the "Rotate Now" button is also not a recommended option, because it will change the password again and may cause service disruption. The Rotate Now button allows you to rotate the passwords of one or more services immediately1

NEW QUESTION # 79
Which three options are valid use cases for multiple clusters in a workload domain? (Choose three.)

• A. Two clusters forming one stretched workload domain
• B. One stretched cluster across two regions and two workload domains
• C. Workload domain with multiple clusters in one rack
• D. One cluster distributed across two racks and one workload domain
• E. One cluster stretching two workload domains
• F. Workload domain with multiple availability zones each containing clusters

Answer: A,C,F

Explanation:
These are valid use cases for multiple clusters in a workload domain according to VMware documentation. A workload domain with multiple availability zones each containing clusters can provide high availability and disaster recovery by distributing workloads across different physical locations within a region. A workload domain with multiple clusters in one rack can provide scalability and flexibility by allowing different configurations and policies for different clusters within a single logical unit. Two clusters forming one stretched workload domain can provide resiliency and fault tolerance by synchronizing data across two sites within a region.

NEW QUESTION # 80
An architect needs to enable the workload management for a VCF VI workload domain and plans on using the minimum requirement for deploying a highly available NSX edge cluster.
What is the minimum requirement for this deployment?

• A. A cluster of three large NSX edge node
• B. A cluster of one large NSX edge node
• C. A cluster of two large NSX edge nodes
• D. A cluster of two small NSX edge nodes

Answer: C

Explanation:
Explanation
This is because according to VMware documentation1, a VI workload domain consists of one or more vSphere clusters that run customer workloads. To enable workload management for a VI workload domain, you need to have an NSX-T edge cluster that provides north-south connectivity and load balancing for Kubernetes clusters
2. The minimum requirement for creating an NSX-T edge cluster is two edge nodes34. The size of the edge nodes depends on the throughput and features required, but for high availability, large size is recommended5.
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-getting-started/GUID-C68FD810-D270-43F2-A

NEW QUESTION # 81
A VMware Cloud Foundation administrator created a Tanzu Namespace in one of the workload domains. Which two functions related to permissions can be performed on the newly created Namespace? (Choose two)

• A. Permissions can be set to either view or edit.
• B. Add a custom role to create more granular permissions.
• C. Add permissions to local vSphere with Tanzu users only.
• D. Add permissions to users from vCenter Single Sign-On identity sources.
• E. Add permissions only from the vSphere.local domain.

Answer: B,D

Explanation:
A quote from reference [1] states that, "To add permissions to users or groups from vCenter Single Sign-On identity sources, the Tanzu Kubernetes cluster administrator can use either the vSphere Client or kubectl." Another quote from reference [1] states that, "By default, a Tanzu Kubernetes cluster includes a set of predefined roles that provides granular permission control for Kubernetes objects. The predefined roles enable cluster groups to be created with specific permissions across the Kubernetes namespace hierarchy. Administrators can also create custom roles to provide more granular permission control that is specific to their organization's requirements."

NEW QUESTION # 82
A VCF administrator is preparing to configure scheduled backups for the SDDC Manager. What must the administrator register as an external component to complete this task?

• A. iSCSI server
• B. NFS server
• C. SMB server
• D. SFTP server

Answer: D

Explanation:
This is because according to VMware documentation, this is what an administrator must register as an external component to complete this task of configuring scheduled backups for the SDDC Manager. SFTP server is one of the supported backup targets for SDDC Manager backups. The administrator can register an SFTP server by navigating to the SDDC Manager UI > Administration > Backup > Site Settings and clicking Register External.

NEW QUESTION # 83
An administrator is tasked with deploying a new VI Workload Domain into an existing VMware Cloud Foundation environment. Which three initial shared storage types are supported? (Choose three.)

• A. NFSv3
• B. SMB 3.0
• C. NFSV4.1
• D. vVols
• E. VMFS on iSCSI
• F. vSAN

Answer: A,E,F

Explanation:
This is because according to VMware documentation6, these are three initial shared storage types that are supported for deploying a new VI Workload Domain into an existing VCF environment. You can also add other supported storage types after deploying the VI Workload Domain.

NEW QUESTION # 84
A VMware Cloud Foundation (VCF) architect is presented with a customer's requirements for an architecture that needs to achieve:
* Network high availability across workloads in two data center locations.
* Maintain the least administrative overhead when performing day 2 operations.
* Decrease the RTO of both management plane and data plane when site-wide failure occurs Which VCF design consideration should the architect recommend?

• A. VCF with NSX-T Federation
• B. VCF with NSX-T Bridging
• C. VCF with NSX-T Multi-Site
• D. VCF with NSX-T L2-VPN

Answer: A

Explanation:
Explanation
According to VMware Cloud Foundation Architecture Poster, VCF with NSX-T Federation provides network high availability across workloads in two data center locations bysynchronizing network configuration and state across sites. It also simplifies day 2 operations by providing centralized management and policy enforcement across sites. It also reduces RTO by enabling fast failover of network services between sites.

NEW QUESTION # 85
What are the correct steps to grant the DevOps team permissions to a vSphere Namespace in a VMware Cloud Foundation (VCF) developer-ready workload domain while following the principle of least privilege access?

• A. At the Permissions setting, add the DevOps group and assign the "Editor" permission
• B. At the Global Permissions setting, add the DevOps group and assign the SupervisorService Cluster Operator role
• C. At the Global Permissions setting, add the DevOps group and assign the vSphere Kubernetes Manager role
• D. At the Permissions setting, add the DevOps group and assign the "Can edit" permission

Answer: A

Explanation:
At the Permissions setting, add the DevOps group and assign the "Editor" permission. This is the recommended way to grant the DevOps team permissions to a vSphere Namespace in a VMware Cloud Foundation (VCF) developer-ready workload domain while following the principle of least privilege access. According to the VMware Cloud Foundation documentation1, the Editor permission allows users to create, modify, and delete objects within a vSphere Namespace, such as vSphere Pods, Tanzu Kubernetes clusters, and stand-alone VMs. The Editor permission also allows users to view and manage storage policies, VM classes, and content libraries for the namespace1 B) At the Global Permissions setting, add the DevOps group and assign the vSphere Kubernetes Manager role is not a correct option, because it will grant more privileges than necessary to the DevOps team. The vSphere Kubernetes Manager role is a global role that allows users to manage all aspects of vSphere with Tanzu, such as enabling Workload Management on clusters, creating and configuring vSphere Namespaces, and managing storage policies and VM classes. This role should be assigned only to vSphere administrators who are responsible for configuring and maintaining the VCF developer-ready workload domain1 C) At the Global Permissions setting, add the DevOps group and assign the SupervisorService Cluster Operator role is not a correct option, because it will also grant more privileges than necessary to the DevOps team. The SupervisorService Cluster Operator role is a global role that allows users to manage all aspects of Supervisor Services on clusters, such as creating and configuring Supervisor Service namespaces, managing service accounts and roles, and deploying service instances. This role should be assigned only to vSphere administrators who are responsible for enabling and managing Supervisor Services on VCF developer-ready workload domains1 D) At the Permissions setting, add the DevOps group and assign the "Can edit" permission is not a correct option, because there is no such permission in vSphere with Tanzu. The available permissions for vSphere Namespaces are Viewer, Editor, and Admin. The Viewer permission allows users to view objects within a vSphere Namespace, but not create or modify them. The Admin permission allows users to perform all actions within a vSphere Namespace, as well as manage permissions for other users or groups1

NEW QUESTION # 86
A VCF administrator is preparing to configure scheduled backups for the SDDC Manager. What must the administrator register as an external component to complete this task?

• A. iSCSI server
• B. NFS server
• C. SMB server
• D. SFTP server

Answer: D

Explanation:
Explanation
This is because according to VMware documentation, this is what an administrator must register as an external component to complete this task of configuring scheduled backups for the SDDC Manager. SFTP server is one of the supported backup targets for SDDC Manager backups. The administrator can register an SFTP server by navigating to the SDDC Manager UI > Administration > Backup > Site Settings and clicking Register External.

NEW QUESTION # 87
A VMware administrator, who works for the U.S defense department, has been asked to upgrade the VMware Cloud Foundation software in a secure location. Due to security concerns, the VCF environment does not have any internet access.
The administrator can connect a laptop to the SDDC manager network but is not allowed to carry any storage media into the facility. To complete this work, the administrator has been given access to a network port where the laptop can be connected for internet access.
Which steps can the administrator follow to download the latest VCF software bundles?

• A. 1. Download the latest bundle transfer utility from myvmware.com.
  2. Use the utility to download the latest software bundles for the upgrade.
  3. Copy the bundles to SDDC manager using file sharing.
• B. 1. Download the latest VCF software bundles on the laptop.
  2. Copy the bundles to SDDC manager using file sharing.
• C. 1. Download all required OVAs onto the laptop.
  2. Copy them to a USB drive.
  3. Attach the drive to the SDDC manager appliance.
• D. 1. Copy the bundle transfer utility from SDDC manager onto the laptop.
  2. Use the utility to download the latest software bundles for the upgrade.
  3. Copy the bundles to SDDC manager using file sharing.

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.3/vcf-lifecycle/GUID-8FA44ACE-8F04-47DA-845E-E0863094F7B0.html The administrator can follow these steps to download the latest VCF software bundles:
Download the latest bundle transfer utility from myvmware.com. This is a tool that allows you to download the bundles from the VMware depot and upload them to the SDDC Manager appliance1 Use the utility to download the latest software bundles for the upgrade. You need to specify the version to which you are upgrading and provide your VMware Customer Connect credentials. The utility will verify the file size and checksum of the downloaded bundles1 Copy the bundles to SDDC manager using file sharing. You can use SCP or SFTP to transfer the bundles from your laptop to the SDDC Manager appliance. You need to upload the manifest file first, which is a metadata file that contains information about the VMware product versions included in the release Bill of Materials1

NEW QUESTION # 88
What is the correct sequence of steps to add a new VI Workload Domain in a VMware Cloud Foundation environment?

• A. 1. Create a network pool.
  2. Commission hosts.
  3. Add licenses to SDDC Manager.
  4. Create the workload domain.
• B. 1. Create a network pool.
  2. Commission hosts.
  3. Create the workload domain.
  4. Add licenses to SDDC Manager.
• C. 1. Configure DNS.
  2. Create a network pool.
  3. Commission hosts.
  4. Add licenses to SDDC Manager.
  5. Create the workload domain.
• D. 1. Configure DNS.
  2. Commission hosts.
  3. Create a network pool.
  4. Add licenses to SDDC Manager.
  5. Create the workload domain.

Answer: C

NEW QUESTION # 89
A systems administrator has recently added newly-commissioned hosts in the the VI workload domain, and IP addresses are automatically configured to their associated network pool. The administrator reviews which storage options require only vMotion and NFS networks in the network pool.
Which two storage options have this requirement? (Choose two.)

• A. vSAN and NFS
• B. vVols on NFS
• C. NFS
• D. Wols on ISCSI
• E. vSAN

Answer: C,E

Explanation:
According to the VMware Cloud Foundation documentation on network requirements, vSAN requires only the vMotion and NFS networks to be configured in the network pool. This is because vSAN traffic can be carried over the vMotion network, and the NFS network is needed to support the use of NFS datastores [1].
NFS is a file-based storage protocol that can be accessed over IP networks. It does not require any special hardware or software, and can be accessed by any device that supports the NFS protocol [2]. As such, it only requires the NFS network to be configured in the network pool.
Therefore, the correct answers are B. NFS and E. vSAN.

NEW QUESTION # 90
Which statement is true regarding NSX Manager configuration in a VMware Cloud Foundation environment?

• A. The cluster virtual IP address is used for API and GUI access to NSX Managers.
• B. NSX Managers can be deployed to different VLANs.
• C. Traffic is load-balanced across all NSX Managers while using the virtual IP address.
• D. The cluster virtual IP address is attached to all NSX Managers.

Answer: A

Explanation:
According to VMware Cloud Foundation Planning and Preparation Workbook, a statement that is true regarding NSX Manager configuration in a VMware Cloud Foundation environment is:
The cluster virtual IP address (VIP) address must be used for API and GUI access to NSX Managers
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-management-domain-design/GUID-B0C6B2C7-E778-4CD1-BBAD-986A8AF5B930.html

NEW QUESTION # 91
A systems administrator wants to integrate Microsoft Certificate Authority with SDDC Manager and has already established a connection between the components.
Which pre-requisite step is required for this integration to work?

• A. Verify that a customized certificate template has been configured on the SDDC Manager
• B. Verify that the Microsoft Certificate Authority Server has the RBAC roles configured on the same machine where the Certificate Authority role is installed.
• C. Verify that the Microsoft Certificate Authority Server has been configured for basic authentication
• D. Verify that the self-signed certificates have been replaced with signed certificates from Microsoft Certificate Authority.

Answer: C

Explanation:
This is because according to VMware documentation6, when integrating Microsoft Certificate Authority with SDDC Manager, you need to configure basic authentication on the Microsoft Certificate Authority Server and provide valid credentials when establishing a connection from SDDC Manager.

NEW QUESTION # 92
Which two configurations are part of the VMware Cloud Builder validation process? (Choose two.)

• A. Passwords: Validates specified passwords Checks for minimum length, invalid characters, and format
• B. Availability configuration: Validates the access to the configured backup locations
• C. Network configuration: Validates CIDR to IP address validity, IP addresses in use, gateways, invalid or missing VLANs. invalid or missing MTU, and network spec availability for all components
• D. Certificates: Validates certificates for ESX, vCenter Server, and NSX
• E. License key Validates format, validity, and expiry for ESX, vSAN, vCenter Server, NSX, vRealize Suite, and Log Insight license keys

Answer: A,E

Explanation:
Explanation
According to VMware Cloud Foundation Planning and Preparation Workbook, two of the configurations that are part of the VMware Cloud Builder validation process are:
* License key: Validates format, validity, and expiry for ESX, vSAN, vCenter Server, NSX, vRealize Suite, and Log Insight license keys
* Passwords: Validates specified passwords Checks for minimum length, invalid characters, and format

NEW QUESTION # 93
Which order of operations deletes a VI Workload Domain from a VMware Cloud Foundation environment?

• A. 1. Migrate VMs.
  2. Remove NSX Edge clusters.
  3. Remove the Workload Domain.
  4. Decommission hosts.
  5. Delete the network pool.
• B. 1. Migrate VMs.
  2. Remove NSX Edge clusters.
  3. Remove the Workload Domain.
  4. Delete the network pool.
  5. Decommission hosts.
• C. 1. Migrate VMs.
  2. Decommission hosts.
  3. Remove the Workload Domain.
  4. Delete the network pool.
• D. 1. Migrate VMs.
  2. Remove the Workload Domain.
  3. Decommission hosts.
  4. Delete the network pool.

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-Cloud-Foundation/5.0/vcf-admin/GUID-F8398C84-2CBC-417D-944B-FA492009B072.html

NEW QUESTION # 94
......

VMware 5V0-31.22 Study Guide Archives : https://www.passcollection.com/5V0-31.22_real-exams.html

Download 5V0-31.22 Mock Test Study Material: https://drive.google.com/open?id=1IJsFyiuK9deAkyT9-aopEuTwpzJaDzYQ