[Sep-2026] Workday Workday-Procure-to-Pay Official Cert Guide PDF
Exam Workday-Procure-to-Pay: Workday Pro Procure-to-Pay Certification Exam - PassCollection
NEW QUESTION # 23
Five keyboards were ordered for new hires in Finance. When the person completing the receipt opened the box, one of the five keyboards was damaged and needs to be returned. When the return was processed, the supplier invoice adjustment was not automatically created.
What caused this problem?
- A. The return reason selected was not configured correctly.
- B. The quantity in the return exceeded the quantity received.
- C. The receiver did not select the correct cost center.
- D. A supplier Return Material Authorization (RMA) was not included in the return.
Answer: A
Explanation:
Return reasons in Workday can be configured with attributes that determine the downstream effects of processing a return, including whether an associated supplier invoice adjustment is automatically generated to reflect the reduced billable quantity resulting from the return. The Official Workday Pro Procure-to-Pay Guide explains that if the return reason selected for the damaged keyboard was not configured to trigger automatic creation of a supplier invoice adjustment, the system will process the return itself but will not generate the corresponding adjustment, requiring manual intervention. Option A is incorrect because if the return quantity had exceeded the received quantity, the system would likely prevent or flag the return itself as invalid, rather than silently process it without generating an adjustment. Option C is incorrect because the cost center selected during receiving affects the accounting worktags on the transaction, but does not control whether a supplier invoice adjustment is automatically generated from a return. Option D is incorrect because a supplier Return Material Authorization may be a procedural or supplier-side requirement, but it is not a Workday system configuration that governs automatic invoice adjustment generation.
NEW QUESTION # 24
What can you base the automation of the supplier invoice creation process on?
- A. Supplier business process
- B. Receipt of goods or services
- C. Supplier contract
- D. Purchase order
Answer: B
Explanation:
Evaluated Receipt Settlement, or ERS, is a Workday feature that allows supplier invoices to be generated automatically rather than requiring the supplier to submit an invoice for manual entry. The Official Workday Pro Procure-to-Pay Guide explains that this automated supplier invoice creation process is triggered by the recording of a receipt of goods or services against a purchase order line that has been configured for automatic invoicing, with the invoice amount derived from the PO price and received quantity. Option A is incorrect because, while a purchase order is a prerequisite for the PO line to exist, the act of placing or approving a PO does not itself trigger automatic invoice creation; receipt confirmation is the actual trigger. Option C is incorrect because there is no configurable trigger called supplier business process that drives automated invoicing. Option D is incorrect because a supplier contract establishes pricing and terms that may feed into the PO, but the contract's existence does not initiate automatic invoice generation; receipt activity does.
NEW QUESTION # 25
Which field is available when completing the Edit Company Procurement Options task?
- A. Default Ship-To Contact and Shipping Terms
- B. Enable Multi-Company on Purchase Orders
- C. Enable Company Accounting Details
- D. Mass Update Ledger Period Status
Answer: A
Explanation:
Edit Company Procurement Options centralizes company-specific configuration settings that streamline procurement transactions for that company, including default values that automatically populate on new requisitions and purchase orders to reduce manual data entry. The Official Workday Pro Procure-to-Pay Guide identifies Default Ship-To Contact and Shipping Terms as fields available within Edit Company Procurement Options, allowing the company to establish standard shipping defaults that apply across procurement transactions unless overridden. Option B is incorrect because enabling multi-company functionality on purchase orders is a broader, cross-company configuration concern and is not a field found within this company-specific procurement options task. Option C is incorrect because Enable Company Accounting Details relates to the separate Edit Company Accounting Details task, which governs ledger and accounting configuration, not procurement defaults. Option D is incorrect because Mass Update Ledger Period Status is an accounting period management task entirely unrelated to procurement configuration and would not appear within Edit Company Procurement Options.
NEW QUESTION # 26
What type of spend can you track in Procure to Pay?
- A. Customer refunds
- B. Goods
- C. Expense reports
- D. Employee payroll
Answer: B
Explanation:
Procure to Pay encompasses the end-to-end process by which an organization acquires the goods and services it needs, from initial requisitioning through receiving, invoicing, and ultimately payment, and is distinct from other financial processes that handle different types of transactions. The Official Workday Pro Procure-to-Pay Guide confirms that Goods, representing tangible, physical items, is a core type of spend tracked through the Procure to Pay process, supported by requisitions, purchase orders, receiving, and supplier invoicing workflows. Option A is incorrect because customer refunds belong to the order-to-cash or accounts receivable process, which deals with money owed to customers, not procurement spend. Option B is incorrect because employee payroll is managed through Human Capital Management and Payroll, an entirely separate functional area from Procure to Pay. Option C is incorrect because expense reports are processed through the Expenses module for employee-initiated reimbursable spend, which, while related to overall spend management, follows a distinct process from supplier-based Procure to Pay transactions.
NEW QUESTION # 27
A company requires buyers to consolidate several requisitions into a single purchase order for a supplier.
To configure this requirement, where must you navigate?
- A. Edit Order-From Connections
- B. Edit Company Procurement Options
- C. Maintain Procurement Conditional Rules
- D. Maintain Procurement Reasons
Answer: B
Explanation:
Many organizations prefer to reduce the number of purchase orders sent to a single supplier by allowing buyers to combine multiple approved requisitions destined for the same supplier into one consolidated purchase order during the sourcing process. The Official Workday Pro Procure-to-Pay Guide identifies Edit Company Procurement Options as the configuration task containing the setting that enables this consolidation behavior, allowing buyers to combine requisition lines for the same supplier into a single PO when sourcing.
Option A is incorrect because Maintain Procurement Reasons manages reason codes used for actions such as cancellations or returns, and has no connection to PO consolidation. Option B is incorrect because Maintain Procurement Conditional Rules, to the extent such configuration exists, addresses conditional business logic rather than the consolidation of requisitions during sourcing. Option C is incorrect because Edit Order-From Connections configures which supplier and location combinations are valid sourcing relationships, not whether multiple requisitions can be merged into a single purchase order.
NEW QUESTION # 28
Refer to the following scenario to answer the question.
You are ready to load a list of procurement items into your system. You will need to report on the items in various capacities for different uses. You must identify all items as Office Supplies. It is possible that you will need to categorize an item to additional uses, such as General Use or Promotional.
What must you set up to fulfill the required association of Office Supplies?
- A. An alternate item identifier named Office Supplies
- B. A purchase group named Office Supplies
- C. A spend category named Office Supplies
- D. An item tag named Office Supplies
Answer: C
Explanation:
In this scenario, every procurement item being loaded must be identified as Office Supplies, which represents the single, required classification that every purchase item in Workday must carry through its spend category assignment. The Official Workday Pro Procure-to-Pay Guide explains that fulfilling this required association means creating a spend category named Office Supplies and assigning it to these items, since spend category is the mandatory, primary classification field on every purchase item. Option B is incorrect because purchase groups provide additional, optional grouping for reporting but are not the required, primary classification mechanism that spend category represents. Option C is incorrect because item tags, or related worktags, are used for additional, non-required classifications, such as the General Use or Promotional categorizations described in the related scenario, not for the mandatory primary classification. Option D is incorrect because alternate item identifiers store supplementary reference codes, such as part numbers, and have no role in fulfilling a categorical classification requirement like Office Supplies.
NEW QUESTION # 29
When should you close purchase order (PO) lines in Workday?
- A. At the end of the fiscal year
- B. After the supplier invoice has been paid in full
- C. When all goods on the line are received and invoiced
- D. After the purchase order is approved
Answer: C
Explanation:
Purchase order lines represent the agreed scope of goods or services to be delivered and billed, and closing a line signals that no further receiving or invoicing activity is expected, which can also affect budget checks and encumbrance balances. The Official Workday Pro Procure-to-Pay Guide indicates that the appropriate time to close a PO line is once all goods or services on that line have been fully received and fully invoiced, confirming that the line's lifecycle is complete and no remaining activity is anticipated. Option A is incorrect because focusing on whether the supplier invoice has been paid ties the closure decision to the payment process rather than to the completeness of receiving and invoicing, which are the relevant triggers. Option C is incorrect because closing a line immediately after approval would prevent any receiving or invoicing from ever occurring against that line, which contradicts its purpose. Option D is incorrect because tying line closure strictly to fiscal year-end is arbitrary and could result in closing incomplete lines prematurely or leaving completed lines open unnecessarily.
NEW QUESTION # 30
Your company would like to create a contract in Workday that references multiple suppliers.
What field on the contract drives this functionality?
- A. Contract Type
- B. Contract Name
- C. Contract Overview
- D. Contract Reference
Answer: A
Explanation:
Supplier contracts in Workday can be structured in different ways depending on business need, and the Contract Type field determines the structural and functional characteristics of the contract, including whether the contract can reference and govern terms with more than one supplier. The Official Workday Pro Procure- to-Pay Guide identifies Contract Type as the field that drives the ability to create a contract referencing multiple suppliers, such as for certain multi-supplier or blanket agreement configurations, by selecting a contract type designed for that purpose. Option A is incorrect because Contract Overview is a descriptive field summarizing the contract's purpose and does not control its structural capabilities. Option B is incorrect because Contract Name is simply an identifying label for the contract and has no bearing on supplier associations. Option D is incorrect because Contract Reference functions as an identifying or cross-reference field rather than a configuration that determines whether multiple suppliers can be associated with the contract.
NEW QUESTION # 31
Refer to the following scenario to answer the question below.
You are ready to load a list of procurement items into your system. You will need to report on the items in various capacities for different uses. You must identify all items as Office Supplies. It is possible that you will need to categorize an item to additional uses, such as General Use or Promotional.
You need to associate more than one classification, not category, to a single item.
What will you use to do so?
- A. Item substitutes
- B. Spend category
- C. Related worktags
- D. Purchase Item groups
Answer: C
Explanation:
Every purchase item in Workday must be assigned exactly one spend category, which serves as its primary, required classification, but organizations frequently need to report on items using additional, secondary classifications that do not fit within the single spend category model. The Official Workday Pro Procure-to- Pay Guide identifies Related Worktags as the mechanism for associating one or more additional classification values, such as General Use or Promotional, with a single item, supplementing its primary spend category without altering it. Option A is incorrect because item substitutes define alternative items that can be used in place of another for sourcing purposes, and have no role in classification or reporting tags. Option B is incorrect because spend category is limited to a single required value per item, the Office Supplies classification in this scenario, and cannot be used to add further classifications. Option D is incorrect because purchase item groups bundle multiple distinct items together for grouped reporting, rather than adding multiple classification tags to a single item.
NEW QUESTION # 32
What type of procurement do you use to track spend for physical items?
- A. Matching
- B. Service
- C. Goods
- D. Project-based Services
Answer: C
Explanation:
Workday categorizes procurement at a high level into Goods and Services to support different transactional behaviors, particularly around receiving, since physical items typically require quantity-based confirmation of delivery while services do not. The Official Workday Pro Procure-to-Pay Guide identifies Goods as the procurement type used to track spend for physical, tangible items, enabling the standard requisition, purchase order, and receiving workflow appropriate for inventory-type purchases. Option A is incorrect because Project-based Services is used for tracking billable, project-related service work rather than physical items, and follows a different tracking model tied to project worktags. Option C is incorrect because Matching is not a procurement type at all; it refers to the three-way matching process used to reconcile supplier invoices against purchase orders and receipts. Option D is incorrect because the general Service procurement type covers intangible deliverables such as labor or consulting, which typically do not involve the physical receipt of goods in the same manner as items procured under the Goods type.
NEW QUESTION # 33
An administrator wants to ensure that supplier invoices and invoice adjustments with attachments will display side by side when applicable.
Where will they configure this?
- A. Edit Supplier Account Options
- B. Edit Tenant Setup - Financials
- C. Edit Company Procurement Options
- D. Edit Company Accounting Details
Answer: B
NEW QUESTION # 34
Your company requires all supplier invoices over 10,000 USD that tag a specific cost center to route to the assistant controller for approval. You need to accommodate this requirement in a business process step with an entry condition rule.
Aligning with Workday best practice for tenant performance, in what order should the condition rule evaluate these fields?
- A. Company > Amount > Cost Center
- B. Amount > Company > Cost Center
- C. Company > Cost Center > Amount
- D. Cost Center > Company > Amount
Answer: C
Explanation:
When configuring entry condition rules on business process steps, the order in which fields are evaluated can affect tenant performance because some field types, such as organizational worktags, are typically more efficient to evaluate first than numeric amount comparisons, and evaluating broader organizational fields before narrower ones helps the system filter the applicable population efficiently. The Official Workday Pro Procure-to-Pay Guide recommends structuring condition rules to evaluate organizational and categorical fields, such as Company and then Cost Center, before numeric fields like Amount, aligning with the requirement to route invoices over 10,000 USD tagging a specific cost center to the assistant controller.
Option A is incorrect because placing Amount before Cost Center evaluates a numeric comparison before narrowing by the more specific organizational dimension. Option B is incorrect for the same reason, leading with Amount rather than organizational fields. Option D is incorrect because evaluating Cost Center before Company does not follow the broad-to-narrow organizational hierarchy, since Company is the higher-level organizational dimension that should be evaluated first.
NEW QUESTION # 35
A supplier invoice line is $150.00. The P.O. line is $100. This has created a match exception.
What can you do to resolve this exception?
- A. Contact the supplier and request a corrected invoice.
- B. Add the supplier to the portal.
- C. Create an additional receipt.
- D. Create a new match exception rule.
Answer: A
Explanation:
Three-way matching compares the amounts, quantities, and prices recorded on a supplier invoice against the corresponding purchase order and receipt, and when an invoice line amount exceeds what the purchase order authorizes, a match exception is generated that must be resolved before the invoice can proceed to payment.
The Official Workday Pro Procure-to-Pay Guide describes contacting the supplier to obtain a corrected invoice as the appropriate resolution when an invoice is billed at a higher amount than the agreed purchase order price, since the discrepancy reflects a billing error on the supplier's part rather than a system configuration issue. Option A is incorrect because adding the supplier to the portal addresses access and self- service capability, not a pricing discrepancy on a specific invoice. Option B is incorrect because creating a new match exception rule would alter system-wide tolerance configurations rather than resolve this individual transactional discrepancy, and is not an appropriate response to a one-off pricing error. Option C is incorrect because creating an additional receipt would misrepresent actual receiving activity unless additional goods were genuinely received, which is not indicated here.
NEW QUESTION # 36
You discovered that an incorrect quantity of received goods was recorded.
How will you correct the error?
- A. Edit the Purchase Order
- B. Close Purchase order line for receiving
- C. Create a Receipt Adjustment
- D. Create a Return to Supplier
Answer: C
Explanation:
Receipts in Workday record the quantity of goods or services that have arrived against a purchase order line, and these records sometimes contain data entry errors that need correction without disturbing the underlying purchase order. The Official Workday Pro Procure-to-Pay Guide identifies the Create Receipt Adjustment task as the correct tool for correcting an incorrect quantity that was recorded on a previously entered receipt, allowing the quantity to be revised up or down while maintaining an accurate audit trail of receiving activity.
Option B is incorrect because editing the purchase order changes the ordered quantity or terms, not the quantity that was actually recorded as received. Option C is incorrect because Return to Supplier represents a physical return of goods back to the supplier and is used when goods need to be sent back, not simply to correct a recording error. Option D is incorrect because closing the PO line for receiving prevents future receipts but does nothing to correct the inaccurate quantity already recorded on the existing receipt.
NEW QUESTION # 37
What types of messages can a custom validation display to users?
- A. No messages display
- B. Warning and error messages
- C. Only error messages
- D. Only warning messages
Answer: B
Explanation:
Custom validations allow administrators to enforce business rules on transactions beyond standard system requirements by evaluating condition rules and displaying a message when conditions are or are not met. The Official Workday Pro Procure-to-Pay Guide explains that custom validations can be configured to display either a Warning message, which alerts the user but allows them to continue, or an Error message, which blocks the user from proceeding until the issue is corrected. This dual capability gives administrators flexibility to either guide users with soft reminders or enforce hard stops for critical business rules. Option A is incorrect because restricting custom validations to warnings only would prevent administrators from enforcing mandatory rules that must block submission. Option C is incorrect because limiting to errors only would remove the ability to provide non-blocking guidance, which is a commonly used and valuable feature.
Option D is incorrect because the entire purpose of a custom validation is to communicate a message to the user when a defined condition is triggered; a validation that displays no message would serve no functional purpose.
NEW QUESTION # 38
What task must you initiate to create a primary worktag for a cost center on all purchase orders and supplier invoices?
- A. Maintain Worktag Usage
- B. Maintain Custom Validations
- C. Enable Custom Worktags
- D. Maintain Related Worktag Usage
Answer: D
NEW QUESTION # 39
To ensure timely processing of supplier invoices, your company wants the Accountant security group to be a backup to create supplier invoices.
What task must you use to allow the Accountant security group to create supplier invoices?
- A. Edit Business Process Policy
- B. Edit Tenant Setup - Financials
- C. Edit Company Procurement Options
- D. Edit Business Process Definition
Answer: A
Explanation:
Workday separates the definition of a business process workflow, which steps occur and in what order, from the security policy governing who is permitted to initiate specific actions within that workflow, such as creating a supplier invoice. The Official Workday Pro Procure-to-Pay Guide explains that to add a security group, such as Accountant, as an authorized initiator for the Create Supplier Invoice action, the administrator edits the Business Process Policy for the Supplier Invoice business process and adds the security group to the initiating step. Option A is incorrect because Edit Tenant Setup - Financials does not manage security group permissions for business process actions. Option B is incorrect because Edit Business Process Definition configures the structure and steps of the workflow itself, such as adding approval steps, not which security groups may initiate those steps. Option D is incorrect because Edit Company Procurement Options governs procurement configuration settings and defaults, and has no role in granting security groups permission to initiate the supplier invoice creation action.
NEW QUESTION # 40
What is the maximum number of supplier categories a supplier can have?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Supplier categories are a classification attribute on the supplier record used for reporting and grouping purposes, such as distinguishing diversity suppliers or spend types, and are distinct from supplier groups, which serve more flexible administrative and security purposes. The Official Workday Pro Procure-to-Pay Guide specifies that each supplier can be assigned to exactly one supplier category at a time, reflecting the field's design as a single-value classification attribute on the supplier record, while supplier groups, by contrast, support unlimited assignments per supplier. Option B, allowing two categories, is incorrect because the supplier category field does not support multiple simultaneous values. Option C, allowing six categories, is incorrect for the same reason and significantly overstates the field's capacity. Option D, allowing twelve categories, is also incorrect and would contradict the single-value design used for consistent reporting and classification. Understanding this one-category limit is important when designing supplier classification strategies, since broader, multi-value groupings for a supplier must instead be accomplished using supplier groups rather than supplier categories.
NEW QUESTION # 41
An employee creates a requisition for an on contract supplier item. After the requisition business process completes, what will occur next?
- A. The requisition line will automatically become a catalog item.
- B. The requisition line will automatically go to the supplier for review.
- C. The requisition line will automatically go to the buyer for sourcing.
- D. The requisition line will automatically become a purchase order line.
Answer: D
Explanation:
When a purchase item on a requisition line is already covered by an active, on-contract supplier agreement, Workday has sufficient information, including the supplier and negotiated pricing, to bypass the manual sourcing step that would otherwise be required for the buyer to assign a supplier. The Official Workday Pro Procure-to-Pay Guide explains that once the requisition business process completes approval for an on- contract item, the requisition line automatically becomes a purchase order line, since the contract has already established the supplier and pricing terms needed to generate the PO. Option A is incorrect because requisition lines are not sent to suppliers for review; supplier-facing communication occurs through purchase orders. Option B is incorrect because the defining characteristic of an on-contract item is that it does not require buyer sourcing, since the supplier is already determined by the contract. Option C is incorrect because the requisition line becomes a transactional purchase order line, not a catalog item, which is a setup record rather than an output of the requisition process.
NEW QUESTION # 42
You are an implemented and your customer requires multiple organization units of the same type. These organizations will have a budget and they will group financial transactions and workers. Certain employees will need to approve transactions and run reports about these organizations.
What delivered organization type should you create?
- A. Cost Center
- B. Department
- C. Supervisory Organization
- D. Allocation Pool
Answer: A
Explanation:
Cost Centers are a delivered Workday organization type designed to group both financial transactions and workers for budgeting, management, and reporting purposes, and they support assigned managers who can approve transactions and run reports specific to their organization. The Official Workday Pro Procure-to-Pay Guide identifies Cost Center as the appropriate organization type when an implementation requires multiple units of the same type that have budgets, group financial transactions and workers together, and allow designated employees to approve transactions and report on the organization, all of which are defining characteristics of Cost Centers. Option A is incorrect because Allocation Pools are used to redistribute costs across other organizations or worktags after transactions have posted, rather than serving as a primary grouping for workers, budgets, and approvals. Option C is incorrect because Supervisory Organizations primarily structure staffing and reporting relationships within Human Capital Management rather than serving as the financial budget and transaction grouping described. Option D is incorrect because Department is not the delivered organization type that natively supports budgets, transaction grouping, and approval routing in the way Cost Center does.
NEW QUESTION # 43
You are setting up your suppliers, and you must group them in various ways.
What is the criterion for supplier categories and groups?
- A. No limits on supplier categories and groups
- B. One supplier category and unlimited supplier groups
- C. One supplier category and one supplier group
- D. Unlimited supplier categories and groups
Answer: B
Explanation:
Workday distinguishes between supplier categories, used as a single-value classification on each supplier record for reporting purposes, and supplier groups, which provide a more flexible, multi-value grouping mechanism that can be used for security, routing, and reporting across many overlapping use cases. The Official Workday Pro Procure-to-Pay Guide confirms that each supplier may be assigned to exactly one supplier category, while being added to an unlimited number of supplier groups, allowing suppliers to participate in many different group-based configurations simultaneously while maintaining a single primary classification. Option A is incorrect because limiting supplier groups to one would eliminate the flexibility that groups are specifically designed to provide. Option C is incorrect because allowing no limits on supplier categories would contradict the single-category design intended for consistent primary classification. Option D is incorrect because, although supplier groups are indeed unlimited, the option also incorrectly claims unlimited supplier categories, which is not supported by the supplier record's single-category field.
NEW QUESTION # 44
You are creating a new purchase item. You must define a default tax applicability.
Where can you assign default tax applicability?
- A. On the purchase item
- B. In the Edit Tenant Setup - Financials task
- C. On the supplier
- D. In the Edit Company Procurement Options task
Answer: A
Explanation:
Tax applicability determines whether tax is calculated on a transaction line and is one of several attributes configured during procurement setup to streamline requisition, purchase order, and supplier invoice entry. The Official Workday Pro Procure-to-Pay Guide identifies the purchase item record as the location where a default Tax Applicability value is assigned, so that whenever the item is added to a transaction, the correct default tax treatment automatically populates, reducing manual entry and errors. Option B is incorrect because suppliers do not carry a tax applicability default for items; tax treatment depends on what is being purchased, not who it is purchased from. Option C is incorrect because Edit Company Procurement Options governs company-wide procurement behaviors such as defaults for shipping, sourcing, and requisition settings, not item-specific tax defaults. Option D is incorrect because Edit Tenant Setup - Financials configures tenant- level financial settings such as currencies, fiscal calendars, and general ledger options, and does not provide a mechanism for setting tax applicability on individual purchase items.
NEW QUESTION # 45
What task do you use to view and modify allowed worktags?
- A. Maintain Worktag Usage
- B. Maintain Custom Validations
- C. Maintain Spend Categories
- D. Maintain Related Worktag Usage
Answer: D
Explanation:
Worktags are the dimensions, such as cost center, fund, project, and custom worktags, used throughout Workday for accounting, reporting, and security. Because some worktag values should only be usable in combination with certain other worktags or organizations, Workday provides a configuration layer to control these allowed combinations. The Official Workday Pro Procure-to-Pay Guide identifies Maintain Related Worktag Usage as the task used to view and modify which worktag values are allowed together on a transaction, effectively defining the permitted, or allowed, worktag relationships across the tenant. Option A, Maintain Worktag Usage, is incorrect because that task controls whether a worktag type is Required, Optional, Primary, or Not Used on a given business object, rather than which specific values are allowed in combination. Option B is incorrect because Maintain Custom Validations creates conditional messages for transactions, not allow-lists of worktag values. Option C is incorrect because Maintain Spend Categories manages the spend category hierarchy and its attributes, and has no role in defining allowed combinations of worktags across the tenant.
NEW QUESTION # 46
......
Free Workday-Procure-to-Pay Exam Dumps to Improve Exam Score: https://www.passcollection.com/Workday-Procure-to-Pay_real-exams.html
