Real Exam Questions 201 Dumps Exam Questions in here [Oct-2021]
Get Latest Oct-2021 Conduct effective penetration tests using 201
NEW QUESTION 100
The current status of a given pool is offline (red). Which condition could explain that state? Assume the descriptions below include all monitors assigned for each scenario.
- A. A monitor is assigned to all nodes and all nodes have passed the test. The pool's members have no specific monitor assigned to them.
- B. The pool has a monitor assigned to it, and none of the pool members passed the test.
- C. No monitors are currently assigned to any pool, member or node.
- D. The pool has a monitor assigned to it, and only some of the pool's members passed the test.
Answer: B
NEW QUESTION 101
Which two statements
describe differences
between the active and standby systems. (Choose two.)
- A. Configuration changes can only be made on the active system.
- B. Virtual server addresses are hosted only by the active system.
- C. Floating selfElIP addresses are hosted only by the active system.
- D. FailElover triggers only cause changes on the active system.
- E. Monitors are performed only by the active system.
Answer: B,C
NEW QUESTION 102
A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?
- A. VLANS
- B. Network routes
- C. IP addresses
- D. Interfaces
Answer: D
Explanation:
trunk is a portchannel, you need to add a physical interface.
NEW QUESTION 103
An LTM device has a virtual server mapped to www5f.com with a pool assigned. The objects are defined as follows:
Virtual server. Destination 192.168.245.100.443 netmask 255.255.255.0
Persistence: Source address persistence netmask 255.0.0.0
SNAT:AutoMap
Profiles: HnP/TCP
How should the BIG-IP Administrator modify the persistence profile so that each unique IP address creates a persistence record?
- A. netmask 255.255.255.255
- B. netmask 255.256.255.0
- C. netmask 0.0.0.0
- D. netmask 255.255.0.0
Answer: A
NEW QUESTION 104
Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all.
- A. The process should always be run from the standby system.
- B. The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.
- C. Multiple files,
including
/config/bigip.conf and
/config/bigip_base.conf,
are synchronized (made identical) each time the process is run. - D. The process should always be run from the system with the latest configuration.
Answer: B
NEW QUESTION 105
Refer to the exhibit.
How many nodes are represented on the network map shown?
- A. Two
- B. Four
- C. Three
- D. One
Answer: C
NEW QUESTION 106
Which three iRule events are likely to be seen in iRules designed to select a pool for load balancing. (Choose 3)
- A. CLIENT_ACCEPTED
- B. SERVER_DATA
- C. SERVER_CONNECTED
- D. HTTP_RESPONSE
- E. CLIENT_DATA
- F. HTTP_REQUEST
- G. SERVER_SELECTED
Answer: A,E,F
NEW QUESTION 107
When using the setup utility to configure a redundant pair, you are asked to provide a "Failover Peer IP". Which address is this.
- A. an address of the other system in a redundant pair configuration
- B. an address of the other system in its management network
- C. an address on the current
system used to
initiate mirroring
and network failElover heartbeat messages - D. an address on the current system used to listen for failElover messages from the partner BIGIP
Answer: A
NEW QUESTION 108
A BIG-IP Administrator assigns the default http health monitor to a pool that has three members listening on port 80 When the administrator connects to each pool member via the CURL utility, two of the members respond with a status of 404 Not Found while the third responds with 200 OK. What will the pool show for member availability?
- A. Two members online and one member offline.
- B. All members online.
- C. Two members offline and one member online.
- D. All members offline.
Answer: B
NEW QUESTION 109
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available. If a pool is marked available (green) which situation is sufficient to cause this?
- A. Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.
- B. Less than 50% of the pool member nodes responded to the ICMP echo request.
- C. All of the pool member nodes are responding to the ICMP monitor as expected.
- D. All of the members of the pool have had their content updated recently and their responses no longer match the monitor.
Answer: A
NEW QUESTION 110
Refer to the exhibit
The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.
Which action should the BIG-IP Administrators to resolve this issue?
- A. Change Auto Last Hop to enabled
- B. Set Port Lockdown of Set IP to Allow All
- C. Assign a physical interface to the new VLAN
- D. Create a Floating Set IP Address
Answer: C
NEW QUESTION 111
Under what condition must an appliance license be reactivated.
- A. Never. Licenses are permanent
for the
platform regardless
the version of software installed. - B. Licenses generally have to be reactivated during system software upgrades.
- C. Licenses only have to be
reactivated
when new features are added (IPv6, Routing Modules, etc)El no other situations. - D. Licenses only have to be reactivated for RMAs El no other situations.
Answer: B
NEW QUESTION 112
A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default
Virtual server 10.10.10.100:443 with UDP profile enabled
Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100 Which object will process this request when https://10.10.10.100 is entered into a browser?
- A. global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
- B. self-IP 10.10.10.100 with port lockdown set to Allow default
- C. virtual server 10.10.10.100.443 with UDP profile enabled
- D. virtual server 10.10.100/24 port o forwarding virtual server
Answer: B
NEW QUESTION 113
Refer to the exhibit.
A BIG-IP Administrator configures a now VLAN on an HA pair of devices that does NOT yet have any traffic. This action causes the assigned traffic group to fail over to the standby device.
Which VLAN setting should be changed to prevent this issue?
- A. Fail-safe
- B. Customer Tag
- C. Auto Last Hop
- D. Source Check
Answer: A
NEW QUESTION 114
The owner of a web application asks the 8IG-IP Administrator to change the port that the BIG-IP device sends traffic to. This change must be made for each member in the server pool named app_pool for their Virtual Server named app_vs. In which area of the BIG-IP Configuration Utility should the BIG-P Administrator make this change?
- A. Local Traffic > Nodes
- B. Local Traffic > Pools
- C. Local Traffic > Virtual Servers
- D. Network > Interfaces
Answer: B
NEW QUESTION 115
Refer to the exhibit.
How are new connections load balanced?
- A. To the pool member with a low priority group value defined
- B. To the pool member with a high priority group value defined
- C. To the pool member with the least number of connections
- D. To the first two members listed with the same priority group
Answer: C
NEW QUESTION 116
Refer to the exhibit
The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.
Which action should the BIG-IP Administrators to resolve this issue?
- A. Change Auto Last Hop to enabled
- B. Set Port Lockdown of Set IP to Allow All
- C. Assign a physical interface to the new VLAN
- D. Create a Floating Set IP Address
Answer: C
NEW QUESTION 117
Refer to the exhibit.
A user attempts to connect to 10.10.10.1.80 using FTP over SSL with an FTPS client. Which virtual server will match and attempt to process the request?
- A. vs_http
- B. vsjutps
- C. nvfs
- D. vs_ftp
Answer: D
NEW QUESTION 118
A site is load balancing to a pool of web servers. Which
statement
is true concerning BIGElIP's ability to verify whether the web servers are functioning properly or not.
- A. Web server monitors can test the content of any page on the server.
- B. Web server monitors always verify the contents of the index.html page.
- C. Web server monitors can test whether the server's address is reachable, but cannot test a page's content.
- D. Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.
Answer: A
NEW QUESTION 119
The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?
- A. Create a new trunk object and assign it to the VLAN
- B. Create a new VLAN object and assign the interface 1.1 untagged
- C. Create a new VLAN object and set Customer Tag to 120
- D. Create a new trunk object with interface 1.1 assigned
Answer: B
NEW QUESTION 120
......
Authentic Best resources for 201 Online Practice Exam: https://www.passcollection.com/201_real-exams.html
Get the superior quality 201 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1LzhGZcLBHYCuf5-0eGSbjKynVvWKa975
