Prepare Top MuleSoft MCIA-Level-1 Exam Study Guide Practice Questions Edition
Go to MCIA-Level-1 Questions - Try MCIA-Level-1 dumps pdf
How to study the MuleSoft mcia - Level 1: MuleSoft Certified Integration Architect - Level 1 Exam
Preparation of certification exams could be covered with two resource types. The first one is the study guides, reference books, and study forums that are elaborated and appropriate for building information from the ground up. Apart from the video tutorials and lectures are a good option to ease the pain of through study and are relatively make the study process more interesting nonetheless these demand time and concentration from the learner. Smart candidates who wish to create a solid foundation altogether examination topics and connected technologies typically mix video lectures with study guides to reap the advantages of each, but practice exams or practice exam engines is one important study tool that goes typically unnoted by most candidates. Practice exams are designed with our experts to make exam prospects test their knowledge on skills attained in the course, as well as prospects become comfortable and familiar with the real exam environment. Statistics have indicated exam anxiety plays a much bigger role in a studentâs failure in the exam than the fear of the unknown. PassCollection expert team recommends preparing some notes on these topics along with it do not forget to practice MuleSoft mcia-level-1 dumps which had been written by our expert team, each of these can assist you loads to clear this exam with excellent marks.
NEW QUESTION 47
What is true about the network connections when a Mule application uses a JMS connector to interact with a JMS provider (message broker)?
- A. The JMS connector supports both sending and receiving of JMS messages over the protocol determined by the JMS provider
- B. The AMQP protocol can be used by the JMS connectorto portably establish connections to various types of JMS providers
- C. To complete sending a JMS message, the JMS connector must establish a network connection with the JMS message recipient
- D. To receive messages into the Mule application, the JMS provider initiates a network connection to the JMS connector and pushes messages along this connection
Answer: A
NEW QUESTION 48
An organization is sizing an Anypoint VPC to extend their internal network to Cloudhub.
For this sizing calculation, the organization assumes 150 Mule applications will be deployed among three(3) production environments and will use Cloudhub's default zero-downtime feature. Each Mule application is expected to be configured with two(2) Cloudhub workers.This is expected to result in several Mule application deployments per hour.
- A. 10.0.0.0/24(256 IPs)
- B. 10.0.0.0/21(2048 IPs)
- C. 10.0.0.0/22(1024IPs)
- D. 10.0.0.0/23(512 IPs)
Answer: B
NEW QUESTION 49
What limits if a particular Anypoint Platform user can discover an asset in Anypoint Exchange?
- A. The existence of a public Anypoint Exchange portal to which the asset has been published
- B. The type of the asset in Anypoint Exchange
- C. The business groups to which the user belongs
- D. If Design Center and RAML were both used to create the asset
Answer: B
Explanation:
Explanation/Reference: https://docs.mulesoft.com/exchange/to-find-info
NEW QUESTION 50
An organization uses Mule runtimes which are managed by Anypoint Platform - Private Cloud Edition. What MuleSoft component is responsible for feeding analytics data to non-MuleSoft analytics platforms?
- A. The Mule runtimes
- B. Anypoint API Manager
- C. Anypoint Runtime Manager
- D. Anypoint Exchange
Answer: C
NEW QUESTION 51
Refer to the exhibit.
An organization is sizing an Anypoint VPC for the non-production deployments of those Mule applications that connect to the organization's on-premises systems. This applies to approx. 60 Mule applications. Each application is deployed to two CloudHub i workers. The organization currently has three non-production environments (DEV, SIT and UAT) that share this VPC. The AWS region of the VPC has two AZs.
The organization has a very mature DevOps approach which automatically progresses each application through all non-production environments before automatically deploying to production. This process results in several Mule application deployments per hour, using CloudHub's normal zero-downtime deployment feature.
What is a CIDR block for this VPC that results in the smallest usable private IP address range?
- A. 10.0.0.0/26 (64 IPS)
- B. 10.0.0.0/24 (256 IPs)
- C. 10.0.0.0/25 (128 IPs)
- D. 10.0.0.0/22 (1024 IPs)
Answer: D
NEW QUESTION 52
What aspects of a CI/CD pipeline for Mule applications can be automated using MuleSoft-provided Maven plugins?
- A. Compile, package, unit test, validate unit test coverage, deploy
- B. Compile, package, unit test, deploy, integration test
- C. Compile, package, unit test, deploy, create associated API instances in API Manager
- D. Import from API designer, compile, package, unit test, deploy, publish to Anypoint Exchange
Answer: B
Explanation:
Explanation/Reference: http://workshop.tools.mulesoft.com/modules/module7_lab4#step-2-configure-the-mule-maven- plugin
NEW QUESTION 53
An XA transaction Is being configured that involves a JMS connector listening for Incoming JMS messages.
What is the meaning of the timeout attribute of the XA transaction, and what happens after the timeout expires?
- A. The time that Is allowed to pass between receiving JMS messages on the same JMS connection After the timeout, a new JMS connection Is established
- B. The time that is allowed to pass between committing the transaction and the completion of the Mule flow After the timeout, flow processing triggers an error
- C. The time that Is allowed to pass without the transaction being ended explicitly After the timeout, the transaction Is forcefully rolled-back
- D. The time that Is allowed to pass for state JMS consumer threads to be destroyed After the timeout, a new JMS consumer thread is created
Answer: C
NEW QUESTION 54
Refer to the exhibit.
A Mule application is being designed to expose a SOAP web service to its clients.
What language is typically used inside the web service's interface definition to define the data structures that the web service Is expected to exchange with its clients?
- A. JSON Schema
- B. RAMI
- C. WSDL
- D. XSD
Answer: C
NEW QUESTION 55
An organization's security policies mandate complete control of the login credentials used to log in to Anypoint Platform. What feature of Anypoint Platform should be used to meet this requirement?
- A. Federated Client Management
- B. Client ID Secret
- C. Federated Identity Management
- D. Enterprise Security Module
Answer: C
NEW QUESTION 56
A Mule application uses the Database connector.
What condition can the Mule application automatically adjust to or recover from without needing to restart or redeploy the Mule application?
- A. The credentials for accessing the database have been updated and the previous credentials are no longer valid
- B. The database server has been updated and hence the database driver library/JAR needs a minor version upgrade
- C. One of the stored procedures being called by the Mule application has been renamed
- D. The database server was unavailable for four hours due to a major outage but is now fully operational again
Answer: D
NEW QUESTION 57
A mule application is deployed to a Single Cloudhub worker and the public URL appears in Runtime Manager as the APP URL.
Requests are sent by external web clients over the public internet to the mule application App url. Each of these requests routed to the HTTPS Listener event source of therunning Mule application.
Later, the DevOps team edits some properties of this running Mule application in Runtime Manager.
Immediately after the new property values are applied in runtime manager, how is the current Mule application deployment affected and how will future web client requests to the Mule application be handled?
- A. Cloudhub will redeploy the mule application to the OLD Cloudhub worker New web client requests are ROUTED to the OLD Cloudhub worker BOTH before and afterthe Mule application is redeployed.
- B. Cloudhub will redeploy the Mule application to the OLD Cloudhub worker New web client requests will RETURN AN ERROR until the Mule application is redeployed to the OLD Cloudhub worker
- C. CloudHub will redeploy the Mule application to a NEW Cloudhub worker New web client requests will RETURN AN ERROR until the NEW Cloudhub worker is available
- D. Cloudhub will redeploy the Mule application to a NEW Cloudhub worker New webclient requests are ROUTED to the OLD Cloudhub worker until the NEW Cloudhub worker is available.
Answer: D
NEW QUESTION 58
An Order microservice and a Fulfillment microservice are being designed to communicate with their dients through message-based integration (and NOT through API invocations).
The Order microservice publishes an Order message (a kind of command message) containing the details of an order to be fulfilled. The intention is that Order messages are only consumed by one Mute application, the Fulfillment microservice.
The Fulfilment microservice consumes Order messages, fulfills the order described therein, and then publishes an OrderFulfilted message (a kind of event message). Each OrderFulfilted message can be consumed by any interested Mule application, and the Order microservice is one such Mute application.
What is the most appropriate choice of message broker(s) and message destination(s) in this scenario?
- A. Order messages are sent to a JMS queueOrderFulfilled messages are sent to a JMS topicBoth microservices Interact with the same JMS provider (message broker) Instance, which must therefore scale to support the load of both microservices
- B. O Order messages are sent to an Anypoint MQ exchange
OrderFulfilted messages are sent to an Anypoint MQ queue
Both microservices interact with Anypoint MQ as the message broker, which must therefore scale to support the toad of both microservices - C. Order messages are sent to a JMS queueOrderFulfilled messages are sent to a JMS topic The Order microservice Interacts with one JMS provider (message broker) and the Fulfillment microservice interacts with a different JMS provider, so that both message brokers can be chosen and scaled to best support the load of each microservice
- D. Older messages are sent directly to the Fulfillment microservices
OrderFulfilled messages are sent directly to the Order microservice
The Order microserviceInteracts with one AMQP-compatible message broker and the Fulfillment microservice Interactswith a different AMQP-compatible message broker, so that both message brokers can be chosen and scaled to best support the toad each microservice
Answer: A
NEW QUESTION 59
A new Mule application under development must implement extensive data transformation logic. Some of the data transformation functionality is already available as external transformation services that are mature and widely used across the organization; the rest is highly specific to the new Mule application.
The organization follows a rigorous testing approach, where every service and application must be extensively acceptance tested before it is allowed to go into production.
What is the best way to implement the data transformation logic for this new Mule application while minimizing the overall testing effort?
- A. Implement and expose all transformation logic as mlaoservices using DataWeave, so it can be reused by any application component that needs it, including the new Mule application
- B. Implement transformation logic in the new Mute application using DataWeave, replicating the transformation logic of existing transformation services
- C. Implement transformation logic in the new Mute application using DataWeave, invoking existing transformation services when possible
- D. Extend the existing transformation services with new transformation logic and Invoke them from the new Mule application
Answer: C
NEW QUESTION 60
An organization uses a four(4) node customer hosted Mule runtime cluster to host one(1) stateless api implementation. The API is accessed over HTTPS through a load balancer that uses round-robin for load distribution. Each node in the cluster has been sized to be able to accept four(4) times the current number of requests.
Two(2) nodes in the cluster experience a power outage and are no longer available. The load balancer directs the outage and blocks the two unavailable the nodes from receiving further HTTP requests.
What performance-related consequence is guaranteed to happen to average, assuming the remaining cluster nodes are fully operational?
- A. 100% increase in the number of requests received by each remaining node
- B. 50% reduction in the throughput of the API
- C. 100% increase in the average response time of the API
- D. 50% increase in the JVM heap memory consumed by each remaining node
Answer: D
NEW QUESTION 61
What Anypoint Connectors support transactions?
- A. Database, JMS, VM, SFTP
- B. Database, 3MS, HTTP
- C. Database, JMS, VM
- D. Database, VM, File
Answer: C
NEW QUESTION 62
Refer to the exhibit. An organization deploys multiple Mule applications to the same customer-hosted Mule runtime. Many of these Mule applications must expose an HTTPS endpoint on the same port using a server- side certificate that rotates often.
What is the most effective way to package the HTTP Listener and package or store the server-side certificate when deploying these Mule applications, so the disruption caused by certificate rotation is minimized?
- A. Package an HTTPS Listener configuration in all Mule APPLICATIONS that need to expose an HTTPS endpoint Package the server-side certificate in a NEW Mule DOMAIN project
- B. Package the HTTPS Listener configuration in a Mule DOMAIN project, referencing it from all Mule applications that need to expose an HTTPS endpoint Package the server-side certificate in ALL Mule APPLICATIONS that need to expose an HTTPS endpoint
- C. Package the HTTPS Listener configuration in a Mule DOMAIN project, referencing it from all Mule applications that need to expose an HTTPS endpoint Store the server-side certificate in a shared filesystem location in the Mule runtime's classpath, OUTSIDE the Mule DOMAIN or any Mule APPLICATION
- D. Package the HTTPS Listener configuration in a Mule DOMAIN project, referencing it from all Mule applications that need to expose an HTTPS endpoint Package the server-side certificate in the SAME Mule DOMAIN project
Answer: C
NEW QUESTION 63
In Anypoint Platform, a company wants to configure multiple identity providers(Idps) for various lines of business (LOBs) Multiple business groups and environments have been defined for the these LOBs. What Anypoint Platform feature can use multiple Idps access the company's business groups and environment?
- A. Roles and permissions
- B. User management
- C. Dedicated load balancers
- D. Client Management
Answer: B
Explanation:
https://www.folkstalk.com/2019/11/mulesoft-integration-and-platform.html
NEW QUESTION 64
......
What is the duration, language, and format of MuleSoft mcia - Level 1: MuleSoft Certified Integration Architect - Level 1 Exam
- Length of Examination: 120 minutes
- Language: English
- Number of Questions: 58
- Passing score: 70%
- Type of Questions: Single and Multiple Choice.
MuleSoft mcia - Level 1: MuleSoft Certified Integration Architect - Level 1 Exam Certified Professional salary
The average salary of a MuleSoft mcia - Level 1: MuleSoft Certified Integration Architect - Level 1 Exam Certified Expert in:
- United State - 100,200 USD
- England - 75,000 POUND
- India. - 14,00,327 INR
- Europe - 70,500 EURO
Free MuleSoft Certified Architect MCIA-Level-1 Exam Question: https://www.passcollection.com/MCIA-Level-1_real-exams.html
