Pass Exam With Full Sureness - DEA-5TT2 Dumps with 62 Questions
Verified DEA-5TT2 dumps Q&As - 100% Pass from PassCollection
EMC DEA-5TT2 (Associate - Networking) Certification Exam is a certification exam that is designed for IT professionals who want to demonstrate their knowledge and skills in networking. DEA-5TT2 exam is offered by Dell EMC, a leading provider of IT solutions and services. DEA-5TT2 exam covers a wide range of topics related to networking, including network design, implementation, maintenance, and troubleshooting.
The DEA-5TT2 exam covers a broad range of networking topics, including network design, implementation, and management. Candidates are tested on their ability to troubleshoot and solve problems related to networking solutions using EMC technologies. Additionally, the exam evaluates the candidate's familiarity with networking concepts such as routing, switching, and security. Associate - Networking Exam certification exam is conducted in a proctored environment, and candidates must demonstrate their mastery of the subject matter to pass.
NEW QUESTION # 23
What accurately describes the Network Time Protocol (NTP)?
- A. Client makes sudden changes in time to keep synchronized.
- B. Client synchronizes among a set of distributed time servers.
- C. Time synchronization algorithms do not account for clock drift.
- D. Implemented on a Dell EMC Network OS 6.
Answer: B
NEW QUESTION # 24
You recently joined a company as a junior-level network administrator. You have been tasked with designing the IPv4 scheme for five networks that will be used for training classrooms. These networks need to support no more than 28 devices each. Due to the existing network design, the senior-level network administrator has asked you to work on network 192.168.40.0/24.
If all networks must be made to logically start with the lowest numbered network and end with the largest numbered network, what is the network ID for the third network?
- A. 192.168.40.64/27
- B. 192.168.40.96/27
- C. 192.168.40.128/27
- D. 192.168.40.32/27
Answer: A
NEW QUESTION # 25
What are Network Address Translation (NAT) inside global addresses?
- A. Private IP addresses used by the local network
- B. Pubic addresses used by other networks outside of the local network
- C. Addresses used by NAT router when sending frames to devices on the local network
- D. Public IP addresses used by the local network to communicate with the Internet
Answer: D
NEW QUESTION # 26
How many total addresses for network, broadcast, and host are provided with the subnet mask
255.255.255.240?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 27
What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?
Answer:
Explanation:
NEW QUESTION # 28
At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?
- A. Transport
- B. Network
- C. Data Link
- D. Physical
Answer: C
NEW QUESTION # 29
Which type of domains are connected by a Layer 2 switch?
- A. Multiple collision domains and a single broadcast domain
- B. Multiple broadcast domains and multiple collision domains
- C. Single collision domain and a single broadcast domain
- D. Single collision domain and multiple broadcast domains
Answer: A
NEW QUESTION # 30
What is the default OSPF "hello interval"?
- A. 5 seconds
- B. 15 seconds
- C. 10 seconds
- D. 30 seconds
Answer: C
NEW QUESTION # 31
Which component translates data, signaling, and protocols to facilitate the data flow between the end device and the network?
- A. Transceiver
- B. NIC
- C. Switch
- D. Port
Answer: A
NEW QUESTION # 32
What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?
- A. 00:C4:4F:23
- B. 4F:23:AF:4A
- C. 23:AF:4A
- D. 00:C4:4F
Answer: D
NEW QUESTION # 33
Which IEEE standard defines the Data Link Layer, Discovery protocol?
- A. 802.1AB
- B. 802.1AX
- C. 802.1D
- D. 802.1W
Answer: A
NEW QUESTION # 34
In IPv4, what is the proper conversion from binary to decimal for the number 11010010?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 35
Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible on Router A?
- A. 144.254.32.2/24
- B. 144.254.32.0/24
- C. 144.254.0.0/16
- D. 144.254.0.0/24
Answer: B
NEW QUESTION # 36
What is the correct sequence of steps when a web browser accesses a web server?
Answer:
Explanation:
NEW QUESTION # 37
What is the valid range assigned to a client during a TCP connection?
- A. 20 - 25
- B. 1023 - 2024
- C. 40000 - 65535
- D. 443 - 1000
Answer: C
NEW QUESTION # 38
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
- A. M6348
- B. MXL
- C. M6220
- D. M8024-K
Answer: B
NEW QUESTION # 39
Which Border Gateway Protocol (BGP) version supports IPv6?
- A. BGPv3
- B. BGPng
- C. BGPv4
- D. BGPv2
Answer: C
NEW QUESTION # 40
Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?
- A. Router
- B. NIC
- C. Repeater
- D. Switch
Answer: C
NEW QUESTION # 41
The IEEE separates the Data Link and Physical ISO layers into four sub-layers. Based on the exhibit, what is the correct order of these sub-layers; from lowest to highest?
Answer:
Explanation:
NEW QUESTION # 42
A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?
- A. Manually specify the OSPF Router ID on each switch within the path.
- B. Break the paths into multiple OSPF areas.
- C. Switch all routing protocols to RIPv2.
- D. Change the reference speed used by OSPF in cost calculations on all switches within the path.
Answer: D
NEW QUESTION # 43
An Ethernet switch receives a frame from a directly connected host. The source MAC address of the frame is not present in the MAC address table for the switch. However, the destination address is present in the MAC address table.
What does the switch do with the frame?
- A. Flushes the destination MAC address and updates the MAC address table in the switch.
- B. Adds the source MAC address and port to the MAC address table and forwards the frame.
- C. Floods the frame to all ports except for the port the frame originated from to locate the source MAC address.
- D. Discards the frame on all ports and sends an error message back to the host.
Answer: B
NEW QUESTION # 44
Which flags are used in the TCP header to initiate and end TCP connections or sessions?
- A. Initiate = Synchronize (SYN) End = Finish (FIN)
- B. Initiate = Finish (FIN) End = Synchronize (SYN)
- C. Initiate = Acknowledge (ACK) End = Finish (FIN)
- D. Initiate = Acknowledge (ACK) End = Synchronize (SYN)
Answer: A
NEW QUESTION # 45
What are the Protocol Data Units (PDUs) called at the Transport layer?
- A. Segment
- B. Packets
- C. Frame
- D. Data Payload
Answer: A
NEW QUESTION # 46
A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients.
Which IPv6 address prefix will the default gateway have on a client?
- A. fe80::/64
- B. ff02::/8
- C. fe08::/64
- D. fd01::/64
Answer: A
NEW QUESTION # 47
......
EMC DEA-5TT2 certification is ideal for individuals who are looking to establish themselves as experts in the field of networking. Associate - Networking Exam certification is targeted towards network administrators, network engineers, and other IT professionals who are responsible for designing, implementing, and managing network infrastructures. Associate - Networking Exam certification exam is designed to validate the skills and knowledge of individuals in the field of networking, and to ensure that they are able to effectively manage and troubleshoot complex network environments.
DEA-5TT2 Dumps Full Questions - Exam Study Guide: https://www.passcollection.com/DEA-5TT2_real-exams.html
Pass DEA-5TT2 Exam in First Attempt Guaranteed 2024 Dumps: https://drive.google.com/open?id=1kEwOeZuV1qRWkRbdnR8ktCAqxGd3m7CL
