Get Started: JN0-362 Exam [2022] Dumps Juniper PDF Questions
JN0-362 Premium Exam Engine pdf Download
NEW QUESTION 15
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes use a step-up algorithm when collisions are detected.
- B. Nodes share a physical medium.
- C. Nodes can successfully transmit simultaneously.
- D. It consists of a single broadcast domain.
Answer: B,D
NEW QUESTION 16
Which standards-based election protocol facilities redundancy in a LAN environment by eliminating a single point failure through the use of master and backup routers?
- A. graceful restart
- B. VRRP
- C. ISSU
- D. BFD
Answer: B
NEW QUESTION 17
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
- B. The router will precalculate a valid path through the network for LSP r1-to-r3
- C. The router will analyze the traffic engineering database to determine the best path through the network
- D. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1
Answer: A
NEW QUESTION 18
What is the Junos default router priority advertisement value for IS-IS?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 19
You must configure an MX Series device to receive and forward a mixture of single-tag and dual- tag frames on interface xe-0/0/0.
In this scenario what will accomplish goal?
- A. xe-0/0/0 {stacked-vlan-tagging;}
- B. xe-0/0/0 {flexible-vlan-tagging;}
- C. xe-0/0/0 {vlan-tagging;}
- D. xe-0/0/0 {vlan-vci-tagging;}
Answer: B
NEW QUESTION 20
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It is loop free by default
- B. Interface Lo0 must be used for peering
- C. It does not support multihop
- D. Neighbors can be located anywhere within the AS
Answer: A,D
NEW QUESTION 21
You are deploying an RSVP-based MPLS network in your core. You must ensure that your LSPs are continually analyzing the usage levels and recalculating the best LSP. You also want to ensure that a minimal amount of traffic is lost when an LSP is re-signaled without user intervention.
Which two features must be enabled in this scenario? (Choose two.)
- A. auto-bandwidth
- B. adaptive
- C. MPLS fast reroute
- D. class of service
Answer: A,C
NEW QUESTION 22
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the remotely connected CE router's loopback address. The address of the loopback is
122.161.2.1, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?
- A. ping VPN-C 122.161.2.1
- B. ping routing-instance VPN-C 122.161.2.1
- C. ping instance VPN-C 122.161.2.1
- D. ping vpn-instance VPN-C 122.161.2.1
Answer: B
NEW QUESTION 23
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
- B. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
- C. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
- D. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
Answer: A,D
NEW QUESTION 24
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true?
- A. The neighbor does not support IPv6
- B. The peer's AS number is misconfigured
- C. The TCP session is not establishing
- D. The update messages contain an unsupported option
Answer: B
NEW QUESTION 25
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- B. The OSPF neighbor will be declared down if three BFD hello packets are missed
- C. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- D. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
Answer: B,C
Explanation:
Explanation
NEW QUESTION 26
Which statement about a virtual-router type of routing instance is correct?
- A. It is the only routing instance type supported on Junos devices
- B. It is used to separate large networks into smaller administrative entities
- C. It is used in Layer 3 VPN implementations
- D. It is used to create and maintain separate routing and forwarding tables
Answer: D
NEW QUESTION 27
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to mark the tunnel up after the hold-time expires
- B. to remove the tunnel interface from inet.0 after the hold-time expires
- C. to reduce the risk of forwarding traffic through a stateless tunnel
- D. to mark the tunnel down after the hold-time expires
Answer: C,D
NEW QUESTION 28
According to Juniper Networks, what are two reasons to peer using loopback addresses when configuring BGP? (Choose two.)
- A. When routers are not directly connected
- B. When establishing an IBGP connection
- C. When establishing a single-link EBGP connection
- D. When routers are not in the same autonomous system
Answer: A,B
NEW QUESTION 29
Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge domain as shown in the exhibit, what happens to frames that arrive that contain unknown unicast destination addresses?
- A. They are dropped.
- B. The are forwarded to the default gateway.
- C. They are flooded.
- D. They are forwarded to the IRB interface.
Answer: C
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface xe-0/0/0.0 has a default metric of 10
- B. Interface ge-1/0/0.0 can only form a single adjacency
- C. Interface ge-3/0/0.0 has a default metric of 10
- D. Interface xe-0/0/0.0 can only form a single adjacency
Answer: C
NEW QUESTION 31
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 32
By default, which RSVP reservation style is used by the Junos OS?
- A. fixed explicit
- B. shared explicit
- C. wildcard filter
- D. fixed filter
Answer: D
NEW QUESTION 33
Which three attributes are well-known mandatory BGP attributes? (Choose three.)
- A. AS path
- B. local preference
- C. MED
- D. next-hop
- E. origin
Answer: A,D,E
NEW QUESTION 34
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 3
- B. Router 2
- C. Router 4
- D. Router 1
Answer: C
NEW QUESTION 35
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
- A. source port
- B. destination port
- C. protocol
- D. destination address
- E. source address
Answer: C,D,E
NEW QUESTION 36
......
Pass Your Juniper Exam with JN0-362 Exam Dumps: https://www.passcollection.com/JN0-362_real-exams.html
