Get Real JN0-363 Quesions Pass Juniper Certification Exams Easily
JN0-363 Dumps are Available for Instant Access
NEW QUESTION # 10
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface ge-3/0/0.0 has a default metric of 10
- B. Interface xe-0/0/0.0 can only form a single adjacency
- C. Interface xe-0/0/0.0 has a default metric of 10
- D. Interface ge-1/0/0.0 can only form a single adjacency
Answer: D
NEW QUESTION # 11
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
- A. It adds an outer IP header with the destination address of the remote tunnel endpoint
- B. It creates and adds a new inner IP header with the remote destination device's IP address
- C. It decrements the time-to-live (TTL) counter by one in the inner IP header
- D. It modifies the source and destination addresses in the inner IP header
Answer: A,C
NEW QUESTION # 12
Which statement is true about GRE encapsulation?
- A. The entire packet is encapsulated by GRE.
- B. Only the IP header is encapsulated by GRE.
- C. The entire frame is encapsulated by GRE.
- D. Only the IP payload is encapsulated by GRE.
Answer: B
NEW QUESTION # 13
In a stateless IPv6 auto-configuration scenario, what is the host's IPv6 address if the interface's MAC address is 12:34:ab:cd:ef:56?
- A. fec0::1234:abff:fecd:ef56/64
- B. fe80::1234:abff:fecd:ef56/64
- C. fe8::1234:abff:fecd:ef56/64
- D. fe80::1234:abcd:ef56/64
Answer: D
NEW QUESTION # 14
In an IS-IS network, which device represents the pseudo-node?
- A. a router connected to the backbone
- B. a designated intermediate system
- C. a router with an IS-IS export policy
- D. an area border router
Answer: B
NEW QUESTION # 15
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than the default local preference
- B. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- C. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
- D. Routes from 10.3.3.3 are more preferred than the default local preference
Answer: D
NEW QUESTION # 16
Which two statements are true when considering logical systems? (Choose two.)
- A. Logical systems provide management separation by providing user access per logical system
- B. Logical tunnels cannot be used to connect logical systems
- C. Logical systems share the master routing table and can create routing instances
- D. Logical systems do not support nonstop active routing
Answer: A,B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-logical-systems-for-routers-and-switches.html
NEW QUESTION # 17
What are three valid BGP message types? (Choose three.)
- A. Keepalive
- B. Route
- C. Refresh
- D. Hello
- E. Open
Answer: A,C,E
NEW QUESTION # 18
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The first address is complete and correct.
- B. All three addresses are the same.
- C. The third address is not formatted correctly.
- D. The second address is incomplete and not correct.
Answer: A,B
NEW QUESTION # 19
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 20
Click the Exhibit button.
Customer-1 wants the Service Provider to allow STP to operate normally on all ports but only allow the MX Series devices to manage the Layer 2 topology.
Referring to the exhibit, which feature needs to be implemented on all devices to accomplish this task?
- A. root protection
- B. MAC movement protection
- C. loop protection
- D. BPDU protection
Answer: C
NEW QUESTION # 21
What are two types of SlDs used in segment touting? (Choose two.)
- A. node
- B. interface
- C. link
- D. adjacency
Answer: A,D
NEW QUESTION # 22
What must be configured for all IBGP speakers in an AS to have consistent routing information?
- A. Default routes to the IBGP gateways
- B. Partial mesh of EBGP sessions between EBGP speakers
- C. Static routes to the EBGP gateways
- D. Full mesh of IBGP sessions between IBGP speakers
Answer: D
NEW QUESTION # 23
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Router A only
- B. BGP routes learned from Routers A, C and E only
- C. BGP routes learned from Routers A and C only
- D. BGP routes learned from Router E only
Answer: B
NEW QUESTION # 24
Click the Exhibit button. Given the OSPF topology shown in the exhibit, how many unique link-state databases are present in the network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 25
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
- B. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
- C. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- D. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
Answer: B
NEW QUESTION # 26
Click the Exhibit.
On an MX Series device, you must enable routing between VLANs 100,200, and the Internet ge-5/1/0, and ge-5/1/2 are bundled into interface ae3. Ge-5/1/4, and ge-5/1/5 are bundles into interface ae2. Both AE bundles trunk VLANs 100 and 200.
In this scenario, what is the correct configuration snippet for VLAN 100?
- A. interfaces {xe-2/1/0{unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0{unit 0{family inet {address 10.0.1.2/24;}}unit 1{family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;interface ip-0/0/0.0;}}
- B. interfaces {xe-2/1/0 {unit 0{family inter {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24;}}unit 1 family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;routing-interface irb.0;}}
- C. interfaces {xe-2/1/0 {unit 0 {family inet {address 10.0.10.2/24;}}}irb {unit 0{family inet {address 10.0.1.2/24:}}unit 1 {family inet {address 10.0.2.2/24;}}}}bridge- domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface ae1.100;interface ae3.100;}}
- D. interfaces {xe-2/1/0 {unit 0{family inet {address 10.0.10.2/24;}}}ip-0/0/0 {unit 0 {family inet {address 10.0.1.2/24;}}unit 1 {family inet {address 10.0.2.2/24;}}}} bridge-domains {vlan- 100{domain-type bridge;vlan-id 100;interface ge-2/2/2.100;interface xe-2/1/0.0;interface ae1.100;interface ae3.100interface ip-0/0/0.0;}}
Answer: C
NEW QUESTION # 27
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
- A. ping routing-instance VPN-A 192.168.1.1
- B. ping mpls l3vpn VPN-A 192.168.1.1
- C. ping vpn-instance VPN-A 192.168.1.1
- D. ping instance VPN-A 192.168.1.1
- E. ping VPN-A 192.168.1.1
Answer: A
NEW QUESTION # 28
Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The OSPF Interfaces are configured as point-to-point.
- B. The ge-0/0'1.0 Interface is configured as passive.
- C. The R2 device is an ABR.
- D. Junos OS default OSPF hello timers and dead intervals are used on all interfaces.
Answer: B,D
NEW QUESTION # 29
You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)
- A. Traffic engineering extensions are not enabled by default in OSPF.
- B. You must use the no-cspf parameter in the label-switched-path configuration.
- C. Traffic engineering extensions ate enabled by default In OSPF.
- D. You must use the policing parameter in the label-switched-path configuration.
Answer: A,B
NEW QUESTION # 30
Click the Exhibit.
Referring to the exhibit, R-1 and R-2 are connected with a LAG on the ae0 interface.
However, the LAG is not operational.
Which action will solve this problem?
- A. Change the system ID on one device.
- B. Set the LACP system priority to a non-zero value on one device.
- C. Set the LACP system priority to a non-zero value on both devices.
- D. Change one device to use LACP passive mode.
Answer: A
NEW QUESTION # 31
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
- A. Apply the next-hop-self as an import policy to the internal BGP peers.
- B. Apply the next-hop-self as an export policy to the external BGP peers.
- C. Apply the next-hop-self as an export policy to the internal BGP peers.
- D. Apply the next-hop-self as an import policy to the external BGP peers.
Answer: C
NEW QUESTION # 32
Click the Exhibit.
Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?
- A. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
- B. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
- C. 100.0.20.1/32
- D. 100.0.1/32 and 100.0.20.1/32
Answer: A
NEW QUESTION # 33
......
The JN0-363 exam is a prerequisite for many advanced Juniper certifications, including the Juniper Networks Certified Internet Specialist (JNCIS-SP) and the Juniper Networks Certified Internet Expert (JNCIE-SP). Passing JN0-363 exam demonstrates to potential employers that an individual has the skills and knowledge necessary to design, configure, and troubleshoot complex routing and switching networks in a service provider environment.
Get Instant Access REAL JN0-363 DUMP Pass Your Exam Easily: https://www.passcollection.com/JN0-363_real-exams.html
Practice with these JN0-363 dumps Certification Sample Questions: https://drive.google.com/open?id=1mfLPc1YC7TaibS8ZuLGnj9aw7cKvdCcJ
