Free SAP C_THR86_2405 Exam Questions & Answer from Training Expert PassCollection [Q43-Q58]

Share

Free SAP C_THR86_2405 Exam Questions and Answer from Training Expert PassCollection

Top SAP C_THR86_2405 Courses Online


SAP C_THR86_2405 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Plan Settings: Managing plan settings is a crucial aspect of the SAP C_THR86_2405 exam. SAP partner consultants will need to demonstrate their abilities to configure and adjust plan settings to align with organizational goals and ensure that compensation plans function smoothly and effectively.
Topic 2
  • Implementation Test: You will be evaluated on your ability to conduct implementation tests. This part of the exam focuses on your skills in verifying that all configurations and settings are correctly implemented, ensuring a smooth deployment of the compensation module.
Topic 3
  • Reports and Workflows: The proficiency in creating, enabling, and exporting reports and workflows will be evaluated. This section of the exam focuses on the ability of a SAP partner consultant to generate critical data insights and automate processes, essential for efficient compensation management.
Topic 4
  • Managing Clean Core: This section of the exam will measure your knowledge of clean core principles. To become a certified SAP partner consultant, you will need to demonstrate how you can apply these principles to maximize business process agility, reduce adaptation efforts, and accelerate innovation within the ERP environment.
Topic 5
  • Permissions: The exam will assess your capability to set up permissions effectively. As an aspiring SAP partner consultant, you will need to show how well you can manage access controls to safeguard sensitive compensation data while ensuring that the right users have access to the necessary functionalities.
Topic 6
  • Compensation Worksheets: In the SAP C_THR86_2405 exam, your ability to configure compensation worksheets will be tested. As an SAP partner consultant, you will need to demonstrate your skills in setting up and managing these worksheets to ensure accurate and effective compensation processes within SAP SuccessFactors.
Topic 7
  • Compensation Plan Guidelines: In this section, SAP partner consultants will be evaluated on their abilities to configure compensation plan guidelines. Candidates must demonstrate their capacity to set up guidelines that align with company policies and industry standards, ensuring fair and consistent compensation practices.
Topic 8
  • Managing Employee Specific Data: The exam will test skills in managing employee-specific data within SAP SuccessFactors. SAP partner consultants will be required to show how effectively they can handle data to ensure accurate compensation decisions that reflect individual employee situations.

 

NEW QUESTION # 43
Your customer has the following requirements for their compensation plan:
1.Allow planners to make recommendations outside of the high/low values. 2. Display only the max min values in the compensation worksheet. Which guideline rule settings must you set to fulfill these requirements?

  • A. In Display Settings use min-max
    *Hard Limit: No
    *High/Low Action: Warn
  • B. In Display Settings use min-max
    *Hard Limit: No
    *High/Low Action: Allow
  • C. In Display Settings use low-high
    *Hard Limit: Yes
    *High/Low Action: Allow
  • D. In Display Settings use min-max
    *Hard Limit: Yes
    *High/Low Action: Allow

Answer: B

Explanation:
To allow planners to make recommendations outside of the high/low values but only display max and min values on the worksheet:
* Option A: "In Display Settings use min-max, Hard Limit: No, High/Low Action: Allow"
* Min-maxdisplay shows only the minimum and maximum guideline values. SettingHard Limitto
"No" allows planners to make recommendations outside these values, andHigh/Low Action:
Allowenables the flexibility needed by the client.


NEW QUESTION # 44
Which of the following requires the use of custom validations?Note There are 2 correct answers to this question

  • A. An error message when adjustments are entered in two different fields
  • B. An error message when planners enter a promotion without changing pay grade
  • C. An error message when the maximum guideline is exceeded
  • D. A warning message when the budget is exceeded

Answer: A,B


NEW QUESTION # 45
Your customer has the following requirements for their compensation plan.1.Allow planners to make recommendations outside of the highlow values.2.Display only the max and min values in the compensation worksheet.Which guideline rule settings must you set to fulfill these requirements?

  • A. In Display Settings use min-max*Hard Limit Yes*High.tow Action Allow
  • B. In Display Settings use min-max*Hard Limit No *High/Low Action Warn
  • C. In Display Settings use low-high*Hard Limit Yes*High/Low Action Allow
  • D. In Display Settings use min-max*Hard Limit No*High/Low Action Allow

Answer: D


NEW QUESTION # 46
Your client wants managers to see a graph of the average salary increase percentage for each performance rating for their entire reporting hierarchy. How can you achieve this?Note. There are 3 correct answers to this question.

  • A. Add the standard YouCalc widget to the worksheet template and have planners access it whie they do their planning
  • B. Create a Tile report and add it to a dashboard for view in the Salary worksheet's Insights icon
  • C. Grant all planners access to the Executive Review and use the standard YouCalc widget
  • D. Create an Ad Hoc report and share it with all planners
  • E. Create a Tile report and add it to a dashboard for view on the planner s homepage

Answer: A,B,C


NEW QUESTION # 47
What are some general principles for creating Route Maps for client projects? Note: There are 2 correct answers to this question.

  • A. Use the "Get Feedback" function to allow people outside the hierarchy to comment on the decisions.
  • B. Use a Signature step so the employee is aware of the decisions once the form is marked as "Complete".
  • C. Use reporting Executive Review for reviewing trends aggregate budgets.
  • D. Only include those that would alter a decision, not simply review.

Answer: C,D


NEW QUESTION # 48
Which of the following can you use to explore released APIs?

  • A. SAP Application Interface Framework
  • B. SAP Business Accelerator Hub
  • C. SAP Integration Suite

Answer: B

Explanation:
SAP provides theSAP Business Accelerator Hub(formerly known as the SAP API Business Hub) as a comprehensive resource to explore released APIs for various SAP products, including SuccessFactors.
* SAP Business Accelerator Hub
* The Business Accelerator Hub hosts an extensive library of APIs, documentation, and use cases for SAP products. Users can explore OData, SOAP, and other available APIs specific to SAP SuccessFactors.
* Why Other Options Are Incorrect
* Option A (SAP Application Interface Framework)is mainly used for error handling and monitoring within on-premise SAP environments.
* Option B (SAP Integration Suite)is used for integration scenarios but does not provide a library to explore APIs; it's intended for creating and managing integrations.
* Reference Documentation
* SAP Help Portal andSAP Business Accelerator HubonExploring and Using APIs.


NEW QUESTION # 49
Your client requests that no employee be eligible for a merit increase greater than 10%. Which configuration steps must you perform?

  • A. Set the guideline pattern to be low-high.
    *Set the high value for all guidelines to be 10.
  • B. Enable a hard limit stop for the merit guideline in Admin Center.
    *Set the maximum value to 10 for all guideline formulas.
  • C. Enable a hard limit stop for the merit guideline in Admin Center.
    *Set the maximum value to 0.10 for all guideline formulas.
  • D. Create a guideline rule with the High/Low Action option set to Allow in Admin Center.
    *Define each guideline formula with a default value of 10.

Answer: B


NEW QUESTION # 50
Your customer has an Employee Central integrated template with an effective date of March 1, 2023. The template has a reloadable field that is mapped to the Pay Grade field in SAP SuccessFactors Employee Central. The forms are launched on February 1, 2023, with a start date of March 1, 2023. An employee gets promoted on March 5, 2023, which includes a pay grade change.
What is the effect on the value that is displayed when the planner opens the worksheet on March 6, 2023?

  • A. The employee becomes ineligible.
  • B. The new pay grade is displayed.
  • C. New forms need to be created because an error will be shown.
  • D. The pay grade remains the same as it was when the forms were created.

Answer: D


NEW QUESTION # 51
Your customer has two pay components, with IDS SALARY_US SALARY_UK, that are used for employees' base salary in their respective countries. They want to plan for all employees on a single worksheet using the employees' periodic salary, NOT the annual value.
What is the best way to accomplish this?

  • A. Create two custom columns map each to the pay components. Use a third custom column to display whichever is non-zero.
  • B. Create a pay component group that includes both pay components use that for the planning.
  • C. Create two different templates use eligibility rules to ensure employees appear on the correct one.
  • D. Ensure the Used for Comp Planning flag of the pay components is set to Comp do NOT map to a specific pay component ID in the worksheet.

Answer: D


NEW QUESTION # 52
Your customer would Ike the Reward team to be able to override the final salary of the employee by directly entering in the final amount in Executive Review.However, they want to make sure that this is only posstole during the last week of the planning cycle.How can you achieve this?

  • A. Create a custom editable Money field In the formula to calculate the final salary, use the dateDIffO function to determine if the custom column can override the calculated value
  • B. Create a custom editable Money field and use custom validation to check that values are not entered until the correct date
  • C. Create a custom editable Money field with field-based permissions set to read-only Change the permissions to editable on the correct date
  • D. Create a custom read-only Money field and change read-only to No on the correct date.

Answer: C


NEW QUESTION # 53
Your customer uses a look-up table to calculate custom budgets, as shown in the screenshot. The budget is based on an employee's country status. In the template, the country is defined with field ID customCountry the status is defined with field ID customStatus.
What is the correct syntax to calculate the adjustment budget?

  • A. toNumber(lookup("2018_BudgetPool,custom Country, customStatus, Adjustment))*curSalary
  • B. toNumber(lookup("2018_BudgetPool", custom Country.customStatus,2))"'curSalary
  • C. toNumber(lookup("2018_BudgetPool", custom Country,customStatus,1))"'curSalary
  • D. toNumber(lookup("2018_BudgetPool", custom Country,customStatus,adjustment))"curSalary

Answer: C

Explanation:
In SAP SuccessFactors Compensation, using look-up tables in formulas is a common method to calculate budget adjustments based on multiple criteria like an employee's country and status. This question is about selecting the correct syntax for using a look-up table to calculate a custom budget based on these criteria. Let's break down the logic and syntax for why option A is correct.
* Look-up Table Functionality in Compensation TemplatesIn SuccessFactors Compensation, look-up tables are used to fetch values dynamically based on specific conditions. Thelookupfunction in SAP allows fetching data from a pre-defined table by matching values from specified columns.
* Syntax and Parameters in the Lookup FunctionThelookupfunction syntax in SAP SuccessFactors Compensation is generally:
plaintext
Copy code
lookup("<lookupTableName>", <lookupKey1>, <lookupKey2>, <columnIndex>)
* <lookupTableName>: Name of the look-up table (in this case, "2018_BudgetPool").
* <lookupKey1>and<lookupKey2>: The fields in the form template used to search in the look-up table. Here, thecustomCountryandcustomStatusfields are used to locate the relevant budget value.
* <columnIndex>: Specifies the index of the column to retrieve. In this scenario, "1" refers to the budget adjustment percentage in the look-up table.
* Correct Formula Explanation
* Option A:toNumber(lookup("2018_BudgetPool", customCountry, customStatus, 1)) * curSalary
* This option correctly uses thelookupfunction to locate the appropriate adjustment factor (e.
g., 1%) from the2018_BudgetPooltable based on the employee's country (customCountry) and status (customStatus).
* ThetoNumber()function is applied to ensure the fetched value is numeric, allowing it to be used in multiplication.
* The formula then multiplies the adjustment factor by the current salary (curSalary) to calculate the adjustment budget.
* Why Other Options Are Incorrect
* Option B:toNumber(lookup("2018_BudgetPool, customCountry, customStatus, Adjustment)) * curSalary
* This option contains syntax errors, such as missing quotation marks around the table name, and "Adjustment" is not a parameter in this lookup. The syntax is incorrect for SuccessFactors' formula setup.
* Option C:toNumber(lookup("2018_BudgetPool", customCountry.customStatus, 2)) * curSalary
* Incorrect becausecustomCountry.customStatusis treated as a single parameter, which is invalid. Each key (customCountry and customStatus) should be separated by a comma, not a period.
* Option D:toNumber(lookup("2018_BudgetPool", customCountry, customStatus, adjustment)) * curSalary
* This option misuses "adjustment" as a parameter in the lookup, which is not defined within the context of the table structure.
* Additional SAP SuccessFactors Compensation References
* SAP SuccessFactors Compensation Guide: Refer to SAP Help Portal's SuccessFactors Compensation Guide for syntax rules of lookup tables.
* Lookup Table Configuration: In the configuration, ensure that the look-up table (2018_BudgetPool) is correctly defined withcustomCountryandcustomStatusas keys, and that the adjustment percentage is in the correct column (column index 1 in this example).
The correct formula,Option A, follows SAP's syntax requirements and functional logic to retrieve the adjustment budget accurately.


NEW QUESTION # 54
Your client wants to display a paragraph in the body of the Compensation Statement that is displayed only to employees who are on a Performance Improvement Plan (PIP). An employee is on a PIP if they have a rating of 1 or 2. The standard Rating column is available on the worksheet.
However, the client does not want the rating itself to ever be displayed on the Statement. How can you satisfy this requirement?

  • A. Add a paragraph to the body of the Statement that states that the section applies only to those who are on a Performance Improvement Plan those employees who are not may ignore the paragraph.
  • B. Include a Conditional Text Section on the statement using the rating field as a condition because all columns on the worksheet are available for conditional logic.
    *Ensure the rating field is hidden from employees on the worksheet with Field-Based Permissions.
  • C. Include the rating on the statement in the right section.
    *Include a Conditional Text Section on the statement using the rating field as a condition.
    *Ensure the rating field is hidden from employees on the worksheet with Field-Based Permissions.
  • D. Include the rating on the statement in the right section.
    *Include a Conditional Text Section on the statement using the rating field as a condition.
    *Ensure the rating field is hidden on the statement by setting an impossible display condition.

Answer: B

Explanation:
To meet the requirement of displaying a paragraph only for employees on a Performance Improvement Plan (PIP) without showing the rating, the use of conditional text combined with field-based permissions is the best approach.
* Conditional Text Section and Field-Based Permissions
* Option D: A conditional text section allows you to set conditions (such as rating equals 1 or 2) to display specific content only for certain employees. Using field-based permissions to hide the rating ensures it is not displayed on the worksheet or statement.
* Why Other Options Are Incorrect
* Options AandBinvolve including the rating in the statement, which the client does not want.
* Option C(adding a paragraph for all employees with a note) does not selectively display the content based on PIP status.
* Reference Documentation
* SAP SuccessFactors Compensation Guide onConditional Text Sections and Field-Based Permissions.


NEW QUESTION # 55
When would you run the Update All Worksheets function?Note There are 3 correct answers to this question.

  • A. When an administrator changes the layout of the compensation plan template to add a new column
  • B. When there has been an update to a lookup table
  • C. When a performance rating is updated
  • D. When there has been a change to an eligibility rule
  • E. When an administrator makes a change to Field Based Permissions

Answer: B,C,D


NEW QUESTION # 56
What happens to compensation forms when the currency conversion table is updated during the planning period?

  • A. In-progress forms are only affected when Update All Worksheets is run
  • B. In-progress forms are NOT affected
  • C. Change is dynamic to in-progress forms
  • D. Only completed forms ate affected

Answer: C


NEW QUESTION # 57
Your customer has the requirement where both sales and non-sales employees are included on a single compensation template. However, only sales employees are eligible for a lump sum award How can you configure a single standard compensation statement template to ensure that just sales employees have a Lump Sum item displayed on their letter?

  • A. You can include the Lump Sum item in the statement template and put a disclaimer in the signature section alerting non-sales employees that that item pertains only to sales employees
  • B. You can hide the Lump Sum column on the compensation worksheet using Field-Based Permissions If the column is hidden on the worksheet, it won t appear on the statement
  • C. You can include the Lump Sum item in the statement template and set a condition on its display so that it will only be shown if it is greater than 0

Answer: C


NEW QUESTION # 58
......

New (2025) SAP C_THR86_2405 Exam Dumps: https://www.passcollection.com/C_THR86_2405_real-exams.html

C_THR86_2405 Practice Dumps - Verified By PassCollection Updated 82 Questions: https://drive.google.com/open?id=1Lfcz1OYMfcs2y4P9KAEwjwhB1TJ0gDCt