Check the Free demo of our HPE0-S59 Exam Dumps with 106 Questions
Clear your concepts with HPE0-S59 Questions Before Attempting Real exam
HP HPE0-S59 (HPE Compute Solutions) Exam is a certification exam designed to test the knowledge and skills of IT professionals in the field of HPE compute solutions. HPE0-S59 exam is intended for individuals who have experience with HPE compute solutions and are looking to validate their skills and knowledge in this area. HPE0-S59 exam covers a wide range of topics, including HPE compute solutions architecture, installation, configuration, management, and troubleshooting.
HP HPE0-S59 exam is a 60-question multiple-choice exam that tests your knowledge of HPE compute solutions. HPE0-S59 exam covers a wide range of topics, including server architectures, storage solutions, networking, security, and virtualization. HPE0-S59 exam is designed to assess your ability to design and deploy HPE compute solutions that meet customer needs.
HP HPE0-S59 (HPE Compute Solutions) Certification Exam is a valuable certification for professionals who want to demonstrate their expertise in HPE compute solutions. With a variety of training resources available and a globally recognized certification upon completion, HPE0-S59 exam is an excellent choice for those looking to advance their careers in the field of HPE compute solutions.
NEW QUESTION # 16
Which statement about manual orchestration during the firmware update is true?
- A. It provides the ability to install an older firmware version than currently Installed In the interconnect
- B. It provides an ability to select and update one side of the Interconnect topology at a time
- C. It allows all the interconnect modules to be activated manually at the same time.
- D. It is supported only for logical enclosures with at least three frames
Answer: B
NEW QUESTION # 17
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Storm control
- C. Pause flood protection
- D. sFlow
Answer: A
Explanation:
Port flap protection is a feature of the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy that can be configured to disable ports experiencing frequent up and down transitions. This feature helps to stabilize the network by preventing the disruptive effects of port flapping.
NEW QUESTION # 18
Click the port on the Frame Link Module which is used to include an HPE Synergy frame in the management ring.
Answer:
Explanation:
Explanation:
The port labeled "MGMT" (Management) in the upper right section of the HPE Frame Link Module (FLM) is the correct port used to include an HPE Synergy frame in the management ring. This port is crucial for linking the frame into the management network of the Synergy infrastructure.
NEW QUESTION # 19
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
Answer:
Explanation:
Explanation:
TheLifecycle Managerin the vSphere Client interface is used for managing and updating ESXi hosts, including changing the ESXi image used in an OS Deployment Plan. This tool allows administrators to import, export, and apply different ESXi images, ensuring that the hosts are running the desired version and configuration of ESXi.
NEW QUESTION # 20
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. Both master modules are located in the same HPE Synergy frame
- C. For the given downlink speed, the maximum number of frames is reached
- D. To use interconnect bay set 3, all compute nodes must be half-height
Answer: D
Explanation:
In HPE Synergy configurations, when using interconnect bay set 3, it implies that the compute nodes should be half-height. This is because bay set 3 is typically utilized in configurations where half-height compute nodes are used to ensure proper alignment and connectivity within the Synergy frame.
NEW QUESTION # 21
Which statement about the HPE D3940 storage module is true?
- A. Only one type of drives (SATA, SAS, SSD) can be installed in each module.
- B. It is configured through CLI available from HPE Synergy console.
- C. Up to five modules can be installed in a single frame with Gen10 servers.
- D. SATA drives require redundant IO adapters to be installed in this module.
Answer: D
NEW QUESTION # 22
What is a limitation when creating a server profile?
- A. Administrator cannot define more than 8 connections within a server profile
- B. It is not possible to create shared volumes on demand through a server profile
- C. ILO management is limited to the integration with Active Directory or LDAP
- D. BIOS settings can be changed only when UEFI optimized is selected as boot mode
Answer: B
Explanation:
A limitation when creating a server profile in HPE OneView is that it is not possible to create shared volumes on demand directly through a server profile. Server profiles in HPE OneView are used to define and manage the configuration of compute nodes, including network connections, BIOS settings, and boot order, but they do not have the capability to dynamically create or manage shared storage volumes.
NEW QUESTION # 23
Which statement about the HPE Synergy Image Streamer is true?
- A. Image Streamer can manage firmware and driver baselines across multiple frames.
- B. Image Streamer can manage OS images, firmware, and drivers across multiple frames.
- C. Image Streamer is used to deploy OS images to the internal disks of compute modules.
- D. Image Streamer is responsible for the configuration of network settings across Synergy frames.
Answer: B
NEW QUESTION # 24
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. To use interconnect bay set 3, all compute nodes must be half-height
- C. For the given downlink speed, the maximum number of frames is reached
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
NEW QUESTION # 25
After deploying an HPE Superdome Flex 280, you need to check the network protocol status and SSL certificate.
Click the appropriate section In the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
Explanation:
To check the network protocol status and SSL certificate in the HPE Superdome Flex 280 management interface, you should click on the "Security" section on the left-hand menu. This section typically provides access to details about protocols like HTTPS, SSL certificates, and port configurations.
NEW QUESTION # 26
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter.
The customer wants to use them to manage HPE Synergy Gen10 compute modules, HPE ProLiant Gen10 servers, and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. Not all of HPE Storage Integration Pack for VMware vCenter features are supported with MSA arrays.
- B. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers.
- C. HPE ProLiant Gen10 systems require HPE OneView for VMware vCenter server licenses for each node.
- D. Both HPE Synergy Gen10 full-height compute modules plugins will require a license.
Answer: A
NEW QUESTION # 27
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan: Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server: Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image: Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface: Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.
NEW QUESTION # 28
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. Both modules are located in different frames for redundancy
- B. An additional license is required to change the enclosure count
- C. For an uplink set, ports from different modules can be selected
- D. interconnect modules are installed in interconnect bays 1 and 4
Answer: D
Explanation:
In the HPE Synergy setup shown in the exhibit, the interconnect type is Virtual Connect SE 32Gb FC Module for Synergy with an enclosure count of 1 and interconnect bay set 1. Typically, in such configurations, the interconnect modules are installed in bays 1 and 4 for redundancy. This placement ensures high availability and failover capabilities.
NEW QUESTION # 29
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- B. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
- C. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- D. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
Answer: D
NEW QUESTION # 30
Which statement about the HPE D3940 storage module is true?
- A. it is configured through CLl available from HPE Synergy console
- B. Up to five modules can be installed in a single frame with Gen10 servers
- C. SATA drives requires redundant 10 adapters to be installed in this module
- D. Only one type of drives (SATA, SAS, SSD) can be installed in each module
Answer: B
Explanation:
The HPE D3940 storage module is designed to provide flexible and scalable storage within the HPE Synergy platform. Up to five D3940 storage modules can be installed in a single HPE Synergy frame when used with Gen10 servers. This configuration allows for high-density storage solutions within a single frame, making it ideal for environments that require substantial storage capacity.
NEW QUESTION # 31
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Arbiter:The Arbiter in an HPE SimpliVity environment is responsible for ensuring communication between nodes and resolving any state conflicts, which is crucial for maintaining service continuity.
* Compute node:In an HPE SimpliVity environment, a compute node refers to non-hyperconverged servers that provide additional compute capacity while utilizing the storage from hyperconverged nodes.
* Intelligent Workload Optimizer:This component integrates with VMware's Distributed Resources Scheduler (DRS) to optimize the placement of virtual machine (VM) compute resources, ensuring they
* are efficiently distributed across the environment.
* Management Virtual Controller:This controller provides centralized management and serves as the events end-point for vCenter, allowing for streamlined management and monitoring of the SimpliVity environment.
NEW QUESTION # 32
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. A management ring can contain mixed frame link module configurations
- B. Mixing different FLM modules is allowed if all of them have the same firmware version
- C. A management ring with mixed FLM modules cannot have more than 12 frames
- D. Existing 2-port FLM modules must be replaced with 4-port FLM modules
Answer: C
NEW QUESTION # 33
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 34
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
Explanation:
To set up HPE Synergy frames after the hardware components are discovered within HPE OneView, the following steps should be followed in the correct order:
* Create an enclosure group.
* Create a logical interconnect group with uplink sets.
* Define all required networks.
* Create a logical enclosure.
* Create server profile templates and server profiles.
* Create an enclosure group:This step involves defining the enclosure group, which includes the configurations for the enclosure such as firmware baselines and logical interconnect groups.
* Create a logical interconnect group with uplink sets:Next, set up the logical interconnect group, which includes the uplink sets that define the connectivity from the enclosures to the data center
* networks.
* Define all required networks:After setting up the logical interconnect group, define all the necessary networks that will be used within the HPE Synergy environment.
* Create a logical enclosure:Create a logical enclosure by combining the physical enclosures with the defined enclosure group, effectively binding the hardware configuration with the logical settings.
* Create server profile templates and server profiles:Finally, create server profile templates and individual server profiles to apply the required configuration settings to the compute modules.
NEW QUESTION # 35
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Disable deduplication for this volume at the array level
- B. Remove the offline disks using array management tools
- C. Install and configure MPIO on me Windows system
- D. Remove the offline disks using Windows Disk Management
Answer: C
Explanation:
The issue of seeing multiple instances of an FC boot volume in Disk Management, with one online and three offline, is typically caused by the lack of Multi-Path I/O (MPIO) configuration. Installing and configuring MPIO on the Windows system will enable the operating system to recognize multiple paths to the same storage volume and manage them correctly, presenting only one online instance of the volume.
NEW QUESTION # 36
Which compute node parameters are captured within server hardware type?
- A. installed operating system
- B. Number of the CPUs
- C. Mezzanine card configuration
- D. Size of the memory Installed
Answer: A
NEW QUESTION # 37
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. App Volume Set
- B. virtual Volume
- C. Virtual Volume Set
- D. Storage Container
Answer: C
NEW QUESTION # 38
Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased
50 HPE.
ProLiant DK385 Gen10 Plus v2.They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?
- A. connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.
- B. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
- C. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.
- D. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
Answer: D
Explanation:
HPE OneView can manage both Synergy and ProLiant systems, allowing for centralized management of all infrastructure components. By adding the HPE ProLiant DL385 Gen10 Plus v2 systems to the existing HPE OneView instance used for Synergy, the customer can streamline management processes and maintain a unified management interface for all systems.
NEW QUESTION # 39
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group What should you check to fix the issue?
- A. if the logical enclosure is configured with redundant master modules
- B. if both FiexNICs are configured with the same speed
- C. if both FiexNICs are connected to different networks
- D. If the logical enclosure is built on at least three HPE Synergy frames
Answer: B
NEW QUESTION # 40
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
NEW QUESTION # 41
......
Get professional help from our HPE0-S59 Dumps PDF: https://www.passcollection.com/HPE0-S59_real-exams.html
Give You Free Regular Updates on HPE0-S59 Exam Questions: https://drive.google.com/open?id=1SIehGHBwTLlHqcB11nBEQnj9dzND426G
