Aug-2026 FREE VMware 3V0-22.25 PRACTICE QUESTIONS AND ANSWERS UPDATES
DEMO FREE BEFORE YOU BUY 3V0-22.25 DUMPS
NEW QUESTION # 15
A VCF Operator notices that a vCenter Server adapter instance has transitioned to a "Collection Failed" state. The error message displayed in the interface is "401 Unauthorized".
What is the most common root cause and the correct remediation step?
- A. The firewall is blocking port 443.
- B. The vCenter Server certificate has expired; regenerate the certificate.
- C. The collector service has crashed; restart the VCF Operations Analytics service.
- D. The service account password used by the adapter has expired or was changed in the target Active Directory/vSphere domain. The operator must Update the Credential in the adapter configuration with the new valid password.
Answer: D
NEW QUESTION # 16
In a large 8-node VCF Operations analytics cluster, what is the specific responsibility of the "Master" node compared to a standard "Data" node?
- A. The Master node processes all data collection adapters; Data nodes only store data.
- B. The Master node holds the only copy of the Global xDB historical data, while Data nodes hold the replicas.
- C. The Master node manages cluster membership, health monitoring, and NTP time synchronization for the cluster, while sharing the data workload.
- D. The Master node is the only node that runs the UI service; Data nodes are headless.
Answer: C
NEW QUESTION # 17
A security team is reviewing the network design for a new Cloud Proxy deployment in a highly restricted "DMZ" data center. They are questioning the firewall rules required for the Cloud Proxy to communicate with the internal VCF Operations cluster.
# Proposed Rule Set
1. Source: Cloud Proxy (DMZ) -> Dest: VCF Ops Cluster (Internal) | Port: 443 | Action: Allow
2. Source: VCF Ops Cluster (Internal) -> Dest: Cloud Proxy (DMZ) | Port: 443 | Action: Allow
3. Source: Cloud Proxy (DMZ) -> Dest: VCF Ops Cluster (Internal) | Port: 22 | Action: Deny Which feedback should the VCF Architect provide to the security team regarding this rule set?
- A. Rule #3 is incorrect; Port 22 must be open for the Cluster to push upgrade binaries to the Proxy.
- B. The design is perfect; bidirectional HTTPS is required for heartbeat exchange.
- C. A new rule must be added to allow Port 80 for insecure bootstrap.
- D. Rule #2 is unnecessary and should be removed. The Cloud Proxy architecture relies on a "One-Way Outbound" connection initiated by the Proxy to the Cluster. The Cluster does not need to initiate connections into the DMZ.
Answer: D
NEW QUESTION # 18
An administrator is responsible for a VCF Private Cloud that is isolated from the Internet. Which four steps must an administrator complete to remain fully licensed whilst operating in a Disconnected Reporting Mode before the Next Usage Report is due? (Choose four.)
- A. Import the license file into VCF Operations
- B. Generate a Usage file from within VCF Operations
- C. Download the license key from the Broadcom Support Portal
- D. Download the license file from the VCF Business Services Console
- E. Upload the file to the VCF Business Services Console
- F. Enable SSH on all ESX hosts
- G. Add the license key into VCF Operations while connected to the Internet
Answer: A,B,D,E
Explanation:
In Disconnected Reporting Mode , VCF Operations cannot automatically submit license usage or retrieve updated license entitlement information. The administrator must manually exchange files between the isolated VCF Operations instance and the VCF Business Services Console . The official workflow states that in disconnected mode, the administrator must manually report license usage and upload license files in VCF Operations . The required sequence is: generate a usage file from License Management > Registration in VCF Operations, upload that usage file to the VCF Business Services Console, download the generated license file, and then import that license file back into VCF Operations . This process must be completed at least once every 180 days ; otherwise, licenses are treated as expired, hosts are disconnected from vCenter, and workload operations cannot start . Adding a legacy license key, enabling SSH, or downloading a license key from the Broadcom Support Portal are not part of the VCF 9 disconnected reporting process. Reference topic: Objective 4.15 - Manage VCF licensing with VCF Operations / Disconnected Reporting Mode / Usage File and License File Exchange .
NEW QUESTION # 19
An administrator has been tasked with creating a custom group for NSX edges. The first two NSX Edges have been tagged with the tag nsx:edge. The custom group has Object Type = Edge Cluster and membership criteria Tag Category = nsx, Tag Value = edge. After 60 minutes the group still has no members. What action must the administrator take?
- A. Change the object type to Virtual Machine
- B. Change the Tag Value to nsx:edge
- C. Change the Tag Category to edge
- D. Change the object type to Edge Transport Node
Answer: D
Explanation:
The administrator must change the custom group object type to Edge Transport Node . The tag criteria are already expressed correctly: nsx is the tag category and edge is the tag value. In VCF Operations custom groups, dynamic membership is calculated by matching the selected Object Type and the defined membership criteria. The documentation states that custom group membership criteria require selecting the object type first, then applying criteria such as metrics, relationships, properties, object name, or tag; VCF Operations then keeps dynamic group membership current based on those rules . The failure occurs because the objects that were tagged are NSX Edge nodes, while the group is filtering for Edge Cluster objects. NSX documentation identifies NSX Edge nodes as Edge Transport Nodes , and Edge nodes are configured and managed under System > Fabric > Nodes > Edge Transport Nodes . An Edge Cluster is a grouping construct and does not match the tagged edge-node objects. Changing the tag value to nsx:edge would incorrectly collapse category and value into one field. Reference topic: Objective 4.5 - VCF Policy / Custom Groups / Dynamic Tag-Based Membership .
NEW QUESTION # 20
A cluster has 1000 GB of Total Capacity.
* HA Admission Control reserves 25%.
* VCF Operations Capacity Buffer is set to 10%.
What is the "Usable Capacity" value that the Capacity Engine will use as the ceiling for its calculations?
- A. 750 GB
- B. 1000 GB
- C. 900 GB
- D. 650 GB. (1000 GB - 250 GB for HA - 100 GB for Buffer).
Answer: D
NEW QUESTION # 21
A Cloud Admin wants to optimize storage costs by deleting "Old Snapshots" automatically. However, the admin wants to ensure that snapshots named "Backup_DoNotDelete" (created by the backup software) are never touched by this job.
# Job Config
Action: Delete Snapshots
Scope: Cluster-01
Criteria: Age > 3 Days
What additional configuration in the job setup handles this exclusion?
- A. Use the "Filter" or "Additional Criteria" option in the job definition to exclude snapshots where
"Snapshot Name contains 'Backup'". - B. Configure the backup software to store snapshots on a different datastore.
- C. Remove the "Action" permission from the VCF Operations service account.
- D. It is not possible; Automation Central deletes all snapshots older than the age criteria.
Answer: A
NEW QUESTION # 22
A Solution Architect is designing a high-scale monitoring solution. The requirement is to increase the data collection frequency for a specific set of "Mission Critical" VMs from 5 minutes to 1 minute to catch rapid performance usage spikes.
# Target Scope
Object: Group "Mission-Critical-Apps" (500 VMs)
Current Policy: Default Policy (Inherited)
# Action Taken
The architect creates a new Policy "1-Min-Collection" and overrides the vCenter Adapter collection interval to 1 minute.
The policy is assigned to the "Mission-Critical-Apps" group.
What is a potential negative architectural impact of this configuration change?
- A. It will automatically disable "Capacity Forecasting" for those VMs because the capacity engine only works on 5-minute intervals.
- B. It requires a dedicated Cloud Proxy for every 100 VMs, making the design too expensive.
- C. It forces the vCenter Server to reboot to apply the new agent schedule.
- D. It significantly increases the storage IOPs and disk space usage on the VCF Operations analytics nodes, potentially affecting global performance if not sized correctly.
Answer: D
NEW QUESTION # 23
A VCF Operations Developer has been tasked with importing metrics and dashboards for a custom application in the enterprise environment. The developer has asked the VCF administrator for a Management Pack Builder environment. What step should be taken to prepare the environment?
- A. Download and deploy the Management Pack Builder Appliance OVA
- B. Give the developer the ContentAdmin role for the VCF Operations instance
- C. Enable the "Management Pack Builder" feature flag in global settings
- D. Install the Management Pack Builder from the VCF Operations Marketplace
Answer: B
Explanation:
The administrator should assign the developer an appropriate VCF Operations content-management role, represented here by ContentAdmin . In VCF Operations 9.0, Management Pack Builder is already integrated into the product; it is not deployed as a separate appliance and does not require installation from Marketplace.
The official documentation states that Management Pack Builder enables creation of custom management packs for VCF Operations and that there is no separate installation required , replacing the older standalone OVA-based model . It is accessed directly in the VCF Operations console under Developer Center > Management Pack Builder , where users can create, import, export, edit, and delete custom designs .
Therefore, the environment preparation step is access enablement, not software deployment. The ContentAdmin role is the best listed fit because Broadcom documents it as a role for users who manage content such as views, reports, dashboards, and custom groups in VCF Operations . Feature flags, OVA deployment, and Marketplace installation are not required. Reference topic: Objective 4.8 - Management Pack Builder / custom management packs / access and content administration .
NEW QUESTION # 24
A VCF Operator needs to analyze a 2 GB .tgz support bundle collected from an ESXi host that crashed and was subsequently rebuilt. The logs inside the bundle are from last week.
Which tool is specifically designed to ingest this offline, historical archive into VCF Operations for Logs for analysis?
- A. vRealize Orchestrator.
- B. The "Interactive Analytics" upload button.
- C. The Log Insight Importer (or li-importer). This standalone command-line utility reads local files (including recursive archives like zip/tar) and pushes them to the Log Insight server via the ingestion API, preserving the historical timestamps found within the logs.
- D. The Log Insight Agent.
Answer: C
NEW QUESTION # 25
A Cloud Admin is adding a new node to an existing single-node VCF Operations instance to enable High Availability (HA).
Which specific node role must be assigned to this second node during configuration?
- A. Data Node
- B. Remote Collector Node
- C. Master Replica Node
- D. Witness Node
Answer: C
NEW QUESTION # 26
When forwarding logs to a legacy syslog server, the destination system administrator complains that the logs are arriving without the hostname in the header, making them impossible to attribute.
Which setting in the VCF Operations for Logs forwarding rule addresses this format issue?
- A. "Enable SSL".
- B. "Worker Count".
- C. "Syslog Format" (e.g., RFC 5424 vs RFC 3164). The administrator might need to toggle the format or check/uncheck "Add source" (or similar header option) to ensure the proprietary fields are flattened into a standard syslog header that the legacy receiver understands.
- D. "Disk Buffer Size".
Answer: C
NEW QUESTION # 27
A DevOps team manages all their Cloud Templates (Blueprints) in a GitHub repository to track changes and enable peer review. They want VCF Automation Assembler to automatically sync these templates so that the latest version in GitHub is always available for deployment.
Which integration feature facilitates this workflow?
- A. The "Marketplace" download.
- B. The "Git Webhook" in Orchestrator.
- C. Git Integration (under Infrastructure -> Connections). The administrator adds a GitHub integration, authenticates with a token, and maps a specific repository and branch. Assembler then syncs the YAML files from that repo, making them available as Cloud Templates in the design canvas.
- D. The "Code Stream" Pipeline.
Answer: C
NEW QUESTION # 28
A Solution Architect is designing a "Multi-Tenant" VCF Operations strategy using Federation. The design involves a "Provider" instance and three "Tenant" instances.
# Setup
Provider Instance: Managed by Service Provider
Tenant A, B, C Instances: Managed by respective customers
Federation: Provider Instance is the "Head"; Tenants are "Members".
# Security Requirement
The Provider must see high-level health scores of Tenant environments.
The Provider must NOT be able to drill down into the names of specific Tenant VMs or view detailed logs.
Which configuration aspect of the Federation effectively enforces this security boundary?
- A. The Federation is "One-Way" by default; the Head pushes data to the Members, so the Provider naturally cannot see Tenant data.
- B. The Provider must use a "Read-Only" user account that is manually created in each Tenant's Active Directory.
- C. Configuring "Data masking" on the Cloud Proxies in the Tenant sites to obscure VM names before they are sent to the Provider.
- D. Federation access controls allow the "Member" (Tenant) to strictly limit the depth of data exposed to the "Head" (Provider), often restricting it to summary/badge data only.
Answer: D
NEW QUESTION # 29
An administrator has been tasked with providing accurate insights into the infrastructure hosting costs of the company's VCF Private Cloud. The company has four datacenters in the same VCF Fleet, all servers use vSAN storage, DC1 and DC2 are colocation datacenters, DC3 and DC4 are company-owned datacenters, and only power and cooling costs differ. Which two steps should the administrator perform in VCF Operations?
(Choose two.)
- A. Edit the Facilities Cost Driver
- B. Edit the Maintenance Cost Driver
- C. Use the Edit for Specific Datacenter edit mode
- D. Edit the Server Hardware: Traditional Cost Driver
- E. Edit the Server Hardware: Hyper-Converged Cost Driver
Answer: A,C
Explanation:
The administrator should use Edit for Specific Datacenter mode and edit the Facilities cost driver. VCF Operations cost drivers calculate private cloud cost from inventory details such as ESX hosts, datastores, VMs, configuration, and utilization, and administrators can modify data-center expenses when the default reference values do not reflect actual costs . Because the only stated variation across DC1-DC4 is power and cooling , the relevant cost category is Facilities , which covers real estate, data center buildings, power, cooling, racks, and facility management labor . The Facilities workflow specifically allows the administrator to modify power and cooling cost per kilowatt-hour or total monthly facilities cost . Since the four datacenters do not share identical power and cooling values, the administrator must select Edit for Specific Datacenter , which allows different cost-driver values for different datacenters instead of applying a single value globally .
Server Hardware: Hyper-Converged is relevant for vSAN/vxRail hardware costing, but the scenario states that all monthly costs are the same except power and cooling. Reference topic: Objective 4.4 - Cost Management / Cost Drivers / Facilities Cost Driver / Specific Datacenter Edit Mode .
NEW QUESTION # 30
Match each VCF Operations monitoring feature with its capability by dragging and dropping the correct item from the Feature list on the left and placing it onto the Capability list on the right.
Answer:
Explanation:
Explanation:
The correct mapping is based on the monitoring method and discovery scope. Service Discovery identifies services running in each VM and builds relationships or dependencies between services running on different VMs, allowing administrators to understand service impact, outage dependency, and escalation paths .
Application Discovery builds on service relationships by identifying predefined and custom applications when services are connected to and communicating with one another; VCF Operations can show the VMs connected to those services and how those services interact . Product-Managed Telegraf is managed directly by VCF Operations and is used to monitor supported operating systems and application services on vCenter- managed VMs, unmanaged VMs, and physical servers categorized as endpoints . Open Source Telegraf is user-managed and can monitor operating systems plus both supported and unsupported application services, although lifecycle actions such as start, stop, upgrade, and plugin activation are not managed by VCF Operations . Reference topic: Objective 4.7 - Monitor Applications with VCF Operations / Service Discovery, Application Discovery, Product-Managed Telegraf, and Open Source Telegraf .
NEW QUESTION # 31
A Manager is confused by the difference between "Cost" and "Price" in the VCF Operations reports.
# Report Data
VM-A Cost: $50/month
VM-A Price: $85/month
What is the source of the "Price" value?
- A. The "Price" is retrieved from AWS public rate cards.
- B. The "Price" is calculated based on Pricing Cards, which allow the admin to define rate cards (e.g., $5 per vCPU) that include profit margins/markups to determine what the consumer is charged, whereas
"Cost" is what the infrastructure actually costs to run (Hardware + Power). - C. The "Price" comes from the vCenter "Notes" field.
- D. The "Price" is simply the Cost plus a fixed 20% tax.
Answer: B
NEW QUESTION # 32
An organization is acquiring a company with a VCF environment that has overlapping IP address ranges with the main corporate data center.
# Scenario
Corporate DC (VCF Ops): 192.168.10.0/24
Acquired Site (Target): 192.168.10.0/24 (Overlapping)
# Requirement
Monitor the Acquired Site using the Corporate VCF Operations instance.
Which design strategy allows VCF Operations to distinguish and collect data from the Acquired Site despite the IP overlap?
- A. Configure "IP Alias" interfaces on the Corporate Analytics nodes to accept the overlapping traffic.
- B. Use IPv6 for the management network in the Acquired Site, as VCF Operations automatically translates IPv4 to IPv6.
- C. Deploy a Cloud Proxy at the Acquired Site. The Cloud Proxy communicates with the Corporate Cluster via NAT (or a unique public/routed IP), and VCF Operations identifies the collected objects by their UUIDs relative to that Proxy/Adapter instance, not just by IP.
- D. It is impossible; the Acquired Site must be re-IPed before monitoring can begin.
Answer: C
NEW QUESTION # 33
While investigating a "VM unresponsive" issue, an administrator finds a log entry: VM stuck in stunned state. They need to check if any administrative actions (like a Snapshot creation or vMotion) occurred immediately prior to this event that might have triggered the stun.
How can they correlate these distinct events (VM Error vs Admin Action) in a single view?
- A. Run a query filtering for vm_name = "MyVM" AND event_type = "vCenter Task".
- B. Run a broad query for the VM name (text contains MyVM) which retrieves both the ESXi logs (reporting the stun) AND the vCenter logs (reporting the 'Create Snapshot' task) because both sources likely mention the VM's name in their messages. Then use "View Context" or sort by time to see the sequence.
- C. It is impossible to mix vCenter and ESXi logs.
- D. Open two browser windows: one for the VM logs, one for vCenter logs.
Answer: B
NEW QUESTION # 34
......
Latest VMware 3V0-22.25 Dumps with Test Engine and PDF: https://www.passcollection.com/3V0-22.25_real-exams.html
VMware 3V0-22.25 Exam Dumps Are Essential To Get Good Marks: https://drive.google.com/open?id=1GdvG04HNbw4HudbcetXODARXpYgItsfP
