300-810 Sample Practice Exam Questions 2023 Updated Verified [Q62-Q82]

300-810 Sample Practice Exam Questions 2023 Updated Verified

Exam Study Guide Free Practice Test LAST UPDATED 300-810

NEW QUESTION 62
Refer to the exhibit.

Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?

A. The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.
B. These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.
C. Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.
D. Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/116637- trouble-jabber-00.html

NEW QUESTION 63
Refer to the exhibit.

The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number they hear the opening greeting. Which action should be taken to correct this issue?

A. Modify the Calling Number to 3005.
B. Modify the Call Forward All to the voicemail pilot.
C. Modify the rule to a Forward Routing Rule.
D. Modify the Dialed Number condition from "Equals" to "In".

Answer: C

NEW QUESTION 64
Refer to the exhibit.

Which action allows a remote Cisco Jabber user utilizing Mobile and Remote Access to automatically log in to a Cisco Unity Connection voicemail box via OAuth?

A. Add CUCM under System Settings > Authz Servers in Cisco Unity Connection.
B. Add CUCM under System Settings > Authz Servers in Cisco Unity.
C. Add CUCM under System Settings > Authz Servers in Cisco Expressway-E.
D. Add CUCM under System Settings > Authz Servers in Cisco Expressway-C.

Answer: A

NEW QUESTION 65
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to key presses. Which two configuration snippets resolve this issue? (Choose two.)

A. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g729r8
B. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay rtp-nte
codec g711ulaw
C. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g729r8
D. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g711ulaw
E. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g711ulaw

Answer: B,D

NEW QUESTION 66
Refer to the exhibit.

Users report that they cannot see the Chat Rooms icon on their Cisco Jabber clients. This feature works without issue in the lab. An engineer reviews the Cisco IM&P and Jabber configuration and finds that the jabber-config.xml file is configured properly to support this feature. Which activity should be performed on the IM&P server to resolve this issue?

A. Restart Cisco XCP Message Archiver in Cisco Unified Serviceability > Tools > Control Center - Feature Services.
B. Activate Cisco XCP Connection Manager in Cisco Unified Serviceability > Tools > Service Activation.
C. Restart XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Control Center - Network Services.
D. Activate XCP Text Conference Manager in Cisco Unified Serviceability > Tools > Service Activation.

Answer: D

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/118684- probsol-chat-00.html

NEW QUESTION 67
Refer to the exhibit.

After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)

A. Restart the Server Recovery Manager service in Cisco Unified Serviceability - Network Services on both IM&P servers.
B. Clear the Enable High Availability check box in the Presence Redundancy Group configuration.
C. Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers.
D. Verify that the Cisco XCP SIP Federation Connection Manager service is running.
E. Ensure that an equal number of users are assigned to each IM&P server.

Answer: A,E

NEW QUESTION 68
Digital networking is configured between two Cisco Unity Connection clusters using an HTTPS connection.
Which two objects are replicated between these two clusters? (Choose two.)

A. users and their corresponding mailboxes
B. user greetings
C. user templates and user greetings
D. partitions and search spaces
E. call handlers

Answer: A,D

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/https_networking/ guide/10xcuchttpsnetx/10xcuchttpsnet010.html

NEW QUESTION 69
An engineer is configuring SAML SSO for a Cisco Unified Communications Manager. After completing all required steps, the engineer wants to verify the status. Which CLI command provides the status of SAML SSO?

A. utils saml status
B. show saml status
C. utils sso status
D. show sso status

Answer: C

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/213293-troubleshoot-sso-in-cucm.html

NEW QUESTION 70
Refer to the exhibit.

Which protocol is used for communication between Cisco IM and Presence and Microsoft Exchange Server?

A. EWS
B. XMPP
C. IMAP
D. POP3

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/presence.html

NEW QUESTION 71
What is a step in the SAML SSO process?

A. The LDAP server extracts the assertion.
B. The IdP redirects the SAML response to the browser.
C. The service provider issues an authentication challenge to the browser.
D. The browser issues an HTTPS POST request to the IdP.

Answer: B

NEW QUESTION 72
Which two Cisco Unity Connection logs are used to troubleshoot issues with Message Waiting Indicators? (Choose two.)

A. Connection Message Transfer Agent
B. Connection IMAP Server
C. Connection Mailbox Sync
D. Connection Conversation Manager
E. Connection Notifier

Answer: D,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/troubleshooting/guide/b_11xcuctsg/b_11xcuctsg_chapter_0101.html#ID-2398-00000004

NEW QUESTION 73
Which SAML component defines the content of data transferred from an IdP to a service provider?

A. assertion
B. binding
C. protocol
D. profiles

Answer: A

Explanation:
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/SAML_SSO_deployment_guide/11_0_1/ CUCM_BK_SF9D0502_00_saml-sso-deployment-guide-1101/CUCM_BK_SF9D0502_00_saml-sso- deployment-guide-11_chapter_01.html#:~:text=SAML%20Components,-A%20SAML%20SSO&text=SAML%
20Assertion%3A%20It%20defines%20the,levels%20of%20access%2Dcontrol%20decisions.

NEW QUESTION 74
An end user opened a ticket, stating that before logging in to Jabber for Windows, a warning is displayed that a server certificate has expired. Which two certificates must be verified on the Cisco Unified Communications Manager and IM&P deployment? (Choose two.)

A. callmanager on Cisco Unified CM
B. tomcat on Cisco Unified CM
C. cup-xmpp on IM&P
D. cup on IM&P
E. capf on Cisco Unified CM

Answer: C,E

NEW QUESTION 75
After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to their digit presses. Which two configuration snippets resolve this issue? (Choose two.)

A. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g729r8
B. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay rtp-nte
codec g711ulaw
C. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g729r8
D. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-notify
codec g711ulaw
E. dial-peer voice 6800 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:10.3.6.127
dtmf-relay sip-kpml
codec g711ulaw

Answer: B,D

NEW QUESTION 76
Users report issues while logging in to their voicemail using the Voicemail tab in their Cisco Jabber clients. The issue occurs after users provide valid Cisco Unified Communications credentials, but they receive a failure message. What is the cause of this issue?

A. The web application voicemail password is set "User Must Change at Next Sign-in".
B. A proper service profile is not configured on Cisco Unified Communications Manager.
C. The voicemail password is not set for all users.
D. The voicemail users are not configured in the Cisco Unity Connection server.

Answer: B

NEW QUESTION 77
Refer to the exhibit.

Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?

A. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
B. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
C. The domain ccnp.cisco.com does not exist on the DNS server.
D. The port specified on the SRV record is wrong.

Answer: D

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

NEW QUESTION 78
What prevents toll fraud on voicemail ports?

A. FAC
B. IP address trusted list on the PSTN gateway
C. CSS
D. Block OffNet to OffNet Transfer service parameter

Answer: C

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/119337- technote-cuc-00.html

NEW QUESTION 79
Refer to the exhibit.

Apple Push Notification integration is configured in a Cisco Unified IM and Presence deployment and has been working property. Administrators now report the error "Push notification settings cannot be configured. 400 Bad Request." in the GUI, and HTTP logs are displaying the errors that are shown in the exhibit. Which action solves this issue?

A. Update Refresh Token Manually.
B. Fix the network connectivity to Apple iCloud.
C. Reboot the IM&P cluster.
D. Change the HTTP proxy settings to remove errors in request syntax.

Answer: A

NEW QUESTION 80
Refer to the exhibit.

Refer to the exhibit Users complain that the message waiting light on the IP phone does not light up when receiving a new voicemail With which codec must the engineer configure a dial peer on Cisco UCME for MW1 traffic to resolve this issue?