2026 Valid JN0-683 Real Exam Questions, practice JNCIP-DC [Q53-Q70]

Share

2026 Valid JN0-683 Real Exam Questions, practice JNCIP-DC

Latest Success Metrics For Actual JN0-683 Exam (Updated 117 Questions)

NEW QUESTION # 53
You are asked to implement Type 2 seamless stitching between two data centers. Which statement is correct in this scenario?

  • A. DCI VXLAN tunnels are formed between spine devices and server leaf devices in the second data center.
  • B. DCI VXLAN tunnels are formed between border leaf devices and border leaf devices in the second data center.
  • C. DCI VXLAN tunnels are formed between server leaf devices and border leaf devices in the second data center.
  • D. DCI VXLAN tunnels are formed between server leaf devices and server leaf devices in the second data center.

Answer: B

Explanation:
With Type 2 seamless stitching, the inter-data-center extension is built at the data center edges.
The border leaf devices act as the stitching points that terminate and re-originate the VXLAN overlay across the DCI, so the VXLAN tunnels for the interconnect are established between the border leaf devices in each data center.


NEW QUESTION # 54
Exhibit.

Referring to the exhibit, when Host A sends an ARP request for Host B's IP address, which Junos feature does leaf1require to send an ARP response back to Host A without having to send a broadcast frame over the fabric?

  • A. proxy ARP
  • B. DAD
  • C. proxy NDP
  • D. GARP

Answer: A

Explanation:
* Scenario Overview:
* In the exhibit, Host A is trying to resolve Host B's IP address (10.10.1.2) through ARP (Address Resolution Protocol). Normally, an ARP request would be broadcasted over the network, and the host owning the IP address (Host B) would respond.
* Role of Proxy ARP:
* Option A:Proxy ARPallows a router or switch (in this case, leaf1) to respond to ARP requests on behalf of another host. Leaf1, knowing the MAC address of Host B through the EVPN MAC advertisement, can reply to Host A's ARP request directly without broadcasting the request across the entire network fabric. This feature reduces unnecessary traffic and increases network efficiency.
Conclusion:
* Option A:Correct-Proxy ARP enables leaf1 to respond to Host A's ARP request for Host B's IP without broadcasting over the IP fabric, thus providing the ARP response locally.


NEW QUESTION # 55
Exhibit.

Referring to the exhibit, the spinel device has an underlay BGP group that is configured to peer with its neighbors' directly connected interfaces. Which two statements are true in this scenario? (Choose two.)

  • A. The multihop statement is required to establish the underlay BGP sessions.
  • B. The multihop statement is not required to establish the underlay BGP sessions.
  • C. Load balancing for the underlay is not configured correctly.
  • D. Load balancing for the underlay is configured correctly.

Answer: B,D

Explanation:
* Understanding BGP Configuration in the Exhibit:
* The exhibit shows a BGP configuration on spine1 with a group named underlay, configured to peer with directly connected interfaces of other devices in the network.
* Multipath multiple-as:This statement allows the router to install multiple paths in the routing table for routes learned from different ASes, facilitating load balancing.
* Key Statements:
* A. The multihop statement is not required to establish the underlay BGP sessions:In this case, the BGP peers are directly connected (as indicated by their neighbor IP addresses), so the multihop statement is unnecessary. Multihop is typically used when BGP peers are not directly connected and packets need to traverse multiple hops.
* D. Load balancing for the underlay is configured correctly:The multipath { multiple-as; } statement in the configuration enables load balancing across multiple paths from different autonomous systems, which is appropriate for underlay networks in data center fabrics.
* Incorrect Statements:
* C. The multihop statement is required to establish the underlay BGP sessions:This is incorrect because the peers are directly connected, making the multihop statement unnecessary.
* B. Load balancing for the underlay is not configured correctly:This is incorrect because the configuration includes the necessary multipath settings for load balancing.
Data Center References:
* BGP configurations in EVPN-VXLAN underlay networks are crucial for ensuring redundancy, load balancing, and efficient route propagation across the data center fabric.


NEW QUESTION # 56
Click the Exhibit button. You want to enable the border leaf device to send Type 5 routes of local networks to the border leaf device in another data center.
What must be changed to the configuration shown in the exhibit to satisfy this requirement?

  • A. Move vrf-target target: 65000:1 to the evpn hierarchy.
  • B. Add encapsulation vxlan to the evpn hierarchy.
  • C. Change: 5001 in the route-distinguisher to: 10010.
  • D. Add a VLAN configuration with an 13-interface to the tenant1 routing instance.

Answer: B

Explanation:
For EVPN Type 5 route advertisement and full inter-data center connectivity, the EVPN configuration must specify the encapsulation type, especially if VXLAN is used as the data-plane overlay.
The parameter encapsulation vxlan must be added under the protocols evpn hierarchy to ensure border leaf devices can advertise and exchange IP prefix routes (Type 5) properly between data centers.
The option to move vrf-target under the EVPN hierarchy is not valid, as that statement is only supported within the routing instance or vni-options section, but not directly under protocols evpn.


NEW QUESTION # 57
Which two statements are true about IP fabrics using unnumbered BGP? (Choose two.)

  • A. Unnumbered BGP peering automatically provisions IPv6 peering.
  • B. Unnumbered BGP requires that family inet is configured on each interface.
  • C. Unnumbered BGP peering automatically provisions IPv4 peering.
  • D. Unnumbered BGP requires that family inet6 is configured on each interface.

Answer: A,D

Explanation:
BGP unnumbered peering uses only link-local IPv6 addresses on interfaces to automatically discover and establish BGP peer sessions. No routable IP addresses are required on the underlay interfaces.
You must configure the interfaces with family inet6 to enable the link-local IPv6 addresses used for peering.
The BGP peering session is dynamically created based on interface names, which simplifies the configuration significantly compared to manual peering with routable IP addresses.
The peer IP and remote AS numbers are automatically configured for BGP unnumbered peering.
This means unnumbered BGP automatically provisions IPv6 peering using the link-local addresses.
It also supports IPv4 route exchange over the IPv6 next-hop established by unnumbered BGP.
https://www.juniper.net/documentation/us/en/software/nce/nce-225-bgp-unnumbered/index.html


NEW QUESTION # 58
You want to provide a OCI that keeps each data center routing domain isolated, while also supporting translation of VNIs. Which DCI scheme allows these features?

  • A. over the top (OTT) with VNI translation enabled
  • B. MPLS DCI label exchange
  • C. VXLAN stitching
  • D. over the top (OTT) with proxy gateways

Answer: C

Explanation:
* Understanding DCI (Data Center Interconnect) Schemes:
* DCI schemes are used to connect multiple data centers, enabling seamless communication and resource sharing between them. The choice of DCI depends on the specific requirements, such as isolation, VNI translation, or routing domain separation.
* VXLAN Stitching:
* VXLAN stitching involves connecting multiple VXLAN segments, allowing VNIs (VXLAN Network Identifiers) from different segments to communicate with each other while maintaining separate routing domains.
* This approach is particularly effective for keeping routing domains isolated while supporting VNI translation, making it ideal for scenarios where you need to connect different data centers or networks without merging their control planes.
* Other Options:
* A. MPLS DCI label exchange:This option typically focuses on MPLS-based interconnections and does not inherently support VNI translation or isolation in the context of VXLAN.
* B. Over the top (OTT) with VNI translation enabled:This could support VNI translation but does not inherently ensure routing domain isolation.
* D. Over the top (OTT) with proxy gateways:This typically involves using external gateways for traffic routing and may not directly support VNI translation or isolation in the same way as VXLAN stitching.
Data Center References:
* VXLAN stitching is a powerful method in multi-data center environments, allowing for flexibility in connecting various VXLAN segments while preserving network isolation and supporting complex interconnect requirements.


NEW QUESTION # 59
You are deploying an EVPN-VXLAN overlay. You must ensure that Layer 3 routing happens on the spine devices. In this scenario, which deployment architecture should you use?

  • A. CRB
  • B. distributed symmetric routing
  • C. bridged overlay
  • D. ERB

Answer: A

Explanation:
In the CRB architecture, inter-VNI (Virtual Network Identifier) routing occurs on the spine switches, meaning the spine devices handle the Layer 3 routing. The leaf switches primarily provide Layer 2 bridging and VXLAN encapsulation/decapsulation, while routing between VXLAN segments is done centrally on the spines.


NEW QUESTION # 60
You are asked to set up an IP fabric thatsupports Al or ML workloads. You have chosen to use lossless Ethernet in this scenario, which statement is correct about congestion management?

  • A. The switch experiencing the congestion notifies the source device.
  • B. ECN is negotiated only among the switches that make up the IP fabric for each queue.
  • C. Only the source and destination devices need ECN enabled.
  • D. ECN marks packets based on WRED settings.

Answer: A

Explanation:
* Understanding Lossless Ethernet and Congestion Management:
* Lossless Ethernet is crucial for AI and ML workloads, where packet loss can significantly degrade performance. To implement lossless Ethernet, congestion management protocols like ECN (Explicit Congestion Notification) are used.
* Role of ECN in Congestion Management:
* Option A:In an IP fabric that supports lossless Ethernet, when a switch experiences congestion, it can mark packets using ECN. This marking notifies the source device of the congestion, allowing the source to reduce its transmission rate, thereby preventing packet loss.
Conclusion:
* Option A:Correct-The switch experiencing congestion notifies the source device via ECN marking.


NEW QUESTION # 61
You are selling up an EVPN-VXLAN architecture (or your new data center. thisinitial deployment will be less than 50 switches: however, it could scale up to 250 switches over time supporting 1024 VLANs. You are still deciding whether to use symmetric or asymmetric routing.
In this scenario, which two statements are correct? (Choose two.)

  • A. Asymmetric routing routes traffic on the egress switch.
  • B. Symmetric routing needs an extra VLAN with an IRB interface for each L3 VRF instance.
  • C. Asymmetric routing is easier lo monitor because of the transit VNI.
  • D. Symmetric routing supports higher scaling numbers.

Answer: A,D

Explanation:
* Symmetric vs. Asymmetric Routing in EVPN-VXLAN:
* Symmetric Routing:Traffic enters and exits the VXLAN network through the same VTEP, regardless of the source or destination. This approach simplifies routing decisions, especially in large networks, and is generally more scalable.
* Asymmetric Routing:The routing occurs on the egress VTEP. This method can be simpler to deploy in smaller environments but becomes complex as the network scales, particularly with larger numbers of VNIs and VLANs.
* Correct Statements:
* C. Symmetric routing supports higher scaling numbers:Symmetric routing is preferred in larger EVPN-VXLAN deployments because it centralizes routing decisions, which can be more easily managed and scaled.
* D. Asymmetric routing routes traffic on the egress switch:This is accurate, as asymmetric routing means the routing decision is made at the final hop, i.e., the egress VTEP before the traffic reaches its destination.
* Incorrect Statements:
* A. Symmetric routing needs an extra VLAN with an IRB interface for each L3 VRF instance:This is not accurate. Symmetric routing does not require an extra VLAN per VRF; rather, it uses the same VLAN/VNI across the network, simplifying routing and VLAN management.
* B. Asymmetric routing is easier to monitor because of the transit VNI:Asymmetric routing is not necessarily easier to monitor; in fact, it can add complexity due to the split routing logic between ingress and egress points.
Data Center References:
* The choice between symmetric and asymmetric routing in an EVPN-VXLAN environment depends on network size, complexity, and specific operational requirements. Symmetric routing is generally more scalable and easier to manage in large-scale deployments.


NEW QUESTION # 62
Exhibit.

Connections between hosts connected to Leaf-1 and Leaf-2 are not working correctly.

  • A. Configure the setswitch-options service-id 1 parameter on Leaf-2.
  • B. Referring to the exhibit, which two configuration changes are required to solve the problem? (Choose two.)
  • C. Configure the setswitch-options vtep-source-interface irb.0parameter on Leaf-1.
  • D. Configure the set switch-options vrf-target target:65000:l parameteron Leaf-2.
  • E. Configure the setswitch-options route-distinguisher i92.168.100.50:i parameter on Leaf-1.

Answer: A,D

Explanation:
* Issue Analysis:
* The problem in the exhibit suggests a mismatch in configuration parameters between Leaf-1 and Leaf-2, leading to communication issues between hosts connected to these leaf devices.
* Configuration Mismatches:
* Service-ID:Leaf-1 has service-id 1 configured, while Leaf-2 does not have this parameter. For consistency and proper operation, the service-id should be the same across both leaf devices.
* VRF Target:Leaf-1 is configured with vrf-target target:65000:1, while Leaf-2 is configured with vrf-target target:65000:2. To allow proper VRF import/export between the two leafs, these should match.
* Corrective Actions:
* C. Configure the set switch-options vrf-target target:65000:1 parameter on Leaf-2:This aligns the VRF targets between the two leaf devices, ensuring they can correctly import and export routes.
* E. Configure the set switch-options service-id 1 parameter on Leaf-2:This ensures that both Leaf-1 and Leaf-2 use the same service ID, which is necessary for consistency in the EVPN- VXLAN setup.
Data Center References:
* Correct configuration of VRF targets and service IDs is critical in EVPN-VXLAN setups to ensure that routes and services are correctly shared and recognized between different devices in the network fabric.


NEW QUESTION # 63
Exhibit.

Referring to the exhibit, why is the active source field blank for the entry that uses the 00:0c:29:e8:b7:39 MAC address?

  • A. The ARP lookup for this host has failed.
  • B. The EVPN route for this host does not have a valid next hop.
  • C. This entry is associated with a multicast EVPN route.
  • D. The host for this entry is locally connected to leaf1.

Answer: B

Explanation:
In this scenario, the active source field is blank for the MAC address 00:0c:29:e8:b7:39, indicating an issue with how this MAC entry is being processed within the EVPN/VXLAN environment.
Step-by-Step Analysis:
* Understanding the MAC Entry:
* The active source field should normally indicate the source of the route advertisement for a specific MAC address within the EVPN. If it is blank, it suggests that there is a problem with how this entry is being learned or propagated.
* Possible Issues:
* Option A:If the EVPN route for this MAC address does not have a valid next hop, the entry might exist in the MAC table, but it will not have a valid path for forwarding, leading to a blank active source.
* Option B:If the ARP lookup had failed, the entry might not even appear in the MAC table.
However, the entry does exist, suggesting that ARP is not the primary issue here.
* Option C:If the host were locally connected, the active source should reflect a local interface, but the field is blank, ruling out local connection as the cause.
* Option D:Multicast EVPN routes typically do not appear in this manner in the MAC table, and this would not cause the active source to be blank.
Conclusion:The most logical explanation is that the EVPN route for this host exists but does not have a valid next hop, leading to the absence of an active source. This is consistent with how EVPN routing tables work in a VXLAN environment, where the lack of a valid next hop would prevent proper route advertisement and forwarding for the specific MAC address.


NEW QUESTION # 64
You are asked to build out the VXLAN control plane.
In this scenario, which two protocols provide this capability? (Choose two.)

  • A. IS-IS
  • B. MBGP
  • C. OSPF
  • D. PIM-SM

Answer: B,D

Explanation:
MBGP (Multicast BGP): MBGP is used to advertise VXLAN information across the control plane, specifically for multicast-based VXLAN deployment. It helps in distributing VXLAN Network Identifiers (VNIs) and other relevant information in an efficient manner across the network.
PIM-SM (Protocol Independent Multicast - Sparse Mode): PIM-SM is used to build multicast distribution trees in VXLAN flood-and-learn mode or when multicast-based VXLAN control planes are used.


NEW QUESTION # 65
Exhibit.

The exhibit shows the truncated output of the show evpn database command.
Given this output, which two statements are correct about the host with MAC address 40:00:dc:01:00:04?
(Choose two.)

  • A. The host is located on VN110002.
  • B. The host is originating from an ESI LAG.
  • C. The host is assigned IP address 10.4.4.5.
  • D. The host is originating from irb.300.

Answer: B,C

Explanation:
* Understanding the Output:
* The show evpn database command output shows the MAC address, VLAN, active source, timestamp, and IP address associated with various hosts in the EVPN instance.
* Analysis of the MAC Address:
* Option A:The MAC address 40:00:dc:01:00:04 is associated with the IP address 10.4.4.5, as indicated by the output in the IP address column. This confirms that this host has been assigned the IP 10.4.4.5.
* Option D:The active source for the MAC address 40:00:dc:01:00:04 is listed as 00:02:00:00:00:
04:00:04:00:00:04:00:04, which indicates that the host is connected via an ESI (Ethernet Segment Identifier) LAG (Link Aggregation Group). This setup is typicallyused in multi-homing scenarios to provide redundancy and load balancing across multiple physical links.
Conclusion:
* Option A:Correct-The host with MAC 40:00:dc:01:00:04 is assigned IP 10.4.4.5.
* Option D:Correct-The host is originating from an ESI LAG, as indicated by the active source value.


NEW QUESTION # 66
You are designing an IP fabric tor a large data center, and you are concerned about growth and scalability.
Which two actions would you take to address these concerns? (Choose two.)

  • A. Design a three-stage Clos IP fabric.
  • B. Design a five-stage Clos IP fabric.
  • C. Use EX4300 Series devices as the spine devices.
  • D. Use OFX5700 Series devices as the super spines.

Answer: A,D

Explanation:
* Clos IP Fabric Design:
* A Clos fabric is a network topology designed for scalable, high-performance data centers. It is typically arranged in multiple stages, providing redundancy, high bandwidth, and low latency.
* Three-Stage Clos Fabric:
* Option B:A three-stage Clos fabric, consisting of leaf, spine, and super spine layers, is widely used in data centers. This design scales well and allows for easy expansion by adding more leaf and spine devices as needed.
* Super Spines for Scalability:
* Option D:Using high-capacity devices like the QFX5700 Series as super spines can handle the increased traffic demands in large data centers and support future growth. These devices provide the necessary bandwidth and scalability for large-scale deployments.
Conclusion:
* Option B:Correct-A three-stage Clos fabric is a proven design that addresses growth and scalability concerns in large data centers.
* Option D:Correct-QFX5700 Series devices are suitable for use as super spines in large-scale environments due to their high performance.


NEW QUESTION # 67
You are setting up an EVPN-VXLAN architecture for your new data center. Its initial deployment will be less than 50 switches; however, it could scale up to 250 switches over time supporting
1024 VLANs. You are still deciding whether to use symmetric or asymmetric routing.
In this scenario, which two statements are correct? (Choose two.)

  • A. Symmetric routing needs an extra VLAN with an IRB interface for each L3 VRF instance.
  • B. Asymmetric routing routes traffic on the egress switch.
  • C. Asymmetric routing is easier lo monitor because of the transit VNI.
  • D. Symmetric routing supports higher scaling numbers.

Answer: A,D

Explanation:
Symmetric routing needs an extra VLAN with an IRB interface for each L3 VRF instance:
Symmetric routing requires an additional VLAN (and corresponding VNI) with an IRB interface for every Layer 3 VRF instance, supporting inter-VLAN routing at every VTEP.
Symmetric routing supports higher scaling numbers: Symmetric routing is preferred for environments with high scaling needs (such as 1024 VLANs and up to 250 switches) because it avoids the scalability limitations seen in asymmetric routing, which requires all VLANs and VNIs to be configured on every switch, leading to configuration complexity and overhead.


NEW QUESTION # 68
Which two statements are true about IP fabrics using unnumbered BGP? (Choose two.)

  • A. Unnumbered BGP peering automatically provisions IPv4 peering.
  • B. Unnumbered BGP peering automatically provisions IPv6 peering.
  • C. Unnumbered BGP requires that family inet is configured on each interface.
  • D. Unnumbered BGP requires that family inet6 is configured on each interface.

Answer: A,D

Explanation:
https://www.juniper.net/documentation/us/en/software/nce/nce-225-bgp-unnumbered/index.html


NEW QUESTION # 69
You want to provide a OCI that keeps each data center routing domain isolated, while also supporting translation of VNIs. Which DCI scheme allows these features?

  • A. over the top (OTT) with VNI translation enabled
  • B. VXLAN stitching
  • C. MPLS DCI label exchange
  • D. over the top (OTT) with proxy gateways

Answer: A

Explanation:
over the top (OTT) with VNI translation enabled: An OTT (Over-the-Top) architecture with VNI translation allows you to keep each data center's routing domain isolated while enabling translation of VXLAN Network Identifiers (VNIs) between the data centers. This approach supports multi-tenancy and facilitates communication between isolated data centers by mapping VNIs between them.


NEW QUESTION # 70
......


Juniper JN0-683 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.
Topic 2
  • VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.
Topic 3
  • EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
Topic 4
  • Layer 3 Fabrics: This section measures the knowledge of professionals managing IP-based networks in data centers. It covers IP fabric architecture and routing, ensuring candidates understand how the network is structured for scalability and how traffic is routed efficiently.

 

Genuine JN0-683 Exam Dumps Free Demo Valid QA's: https://www.passcollection.com/JN0-683_real-exams.html

Printable & Easy to Use JNCIP-DC JN0-683 Dumps 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1JU_rTBo-jlKSc59d9-Gys4eGyh5iO2Fg