2021 Latest 300-435 Exam Dumps Recently Updated 110 Questions
Cisco 300-435 Real 2021 Braindumps Mock Exam Dumps
Conclusion
With the Cisco 300-435 exam, everyone intending to specialize in skills that touch on programming and automating networks cannot go wrong. The ultimate prize is holding a certificate that displays your resilience and achievements. Since ample learning opportunities by way of study guides and courses are there, the chances of reaching the peak of one’s career are high. Keep working on your potential to find your footing in the bankable networking sphere.
NEW QUESTION 43
Which description of how virtual MAC addresses are assigned to the members of a GLBP group is true?
- A. Each device assigns its own address
- B. The AVF assigns the addresses
- C. The device that has the highest IP address assigns the addresses
- D. The AVG assigns the addresses
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ft_glbp.html#wp1039651
NEW QUESTION 44
Setting is used for the dampening period when configuring an on-change publication for YANG-push versus OpenConfig.
What are two characteristics of synchronous calls to APIs? (Choose two.)
- A. They make an application less portable, so asynchronous calls are preferred
- B. They do not block while waiting for the API to be processed
- C. They add perceived latency to an application if data is not received
- D. They block until a response is returned from the servers
- E. Calls are limited to specific programming languages
Answer: C,D
Explanation:
Section: Automate APIs and Protocols
Explanation/Reference: https://docs.cloudmgmt.cisco.com/display/40API/Synchronous+and+Asynchronous+APIs
NEW QUESTION 45
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION 46
Refer to the exhibit.
Which NETCONF protocol operation is used to interact with the YANG model?
- A. <copy-config>
- B. <get>
- C. <get-config>
- D. <edit-config>
Answer: D
NEW QUESTION 47
During a network outage, a network administrator used the Cisco SD-WAN vManage Troubleshooting Dashboard APIs to troubleshoot the cause of the issue. Which detail is captured during troubleshooting with these APIs?
- A. public cloud resources
- B. VPN health
- C. OMP connection health
- D. connections summary
Answer: D
Explanation:
Reference:
https://sdwandocs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/Troubleshooting_APIs/Dashboard
https://sdwandocs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/Troubleshooting_APIs/Dashboard
https://sdwandocs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/Troubleshooting_APIs/Dashboard
NEW QUESTION 48
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. yang-data+json
- B. yang.data+json
- C. json
- D. yang +json
Answer: A
NEW QUESTION 49
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. yang-data+json
- B. yang.data+json
- C. json
- D. yang +json
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
NEW QUESTION 50
Refer to the exhibit.
An engineer must apply IP addressing to five new WAN sites and chooses the new subnets pictured. The previous administrator applied the addressing at Headquarters. What is the minimum summary range to cover the existing WAN sites while also allowing for three additional WAN sites of the same size, for future growth?
- A. 10.0.64.0/17
- B. 10.0.60.0/18
- C. 10.0.64.0/18
- D. 10.0.0.0/17
Answer: A
NEW QUESTION 51
Which two Netmiko methods are used to configure a device? (Choose two.)
- A. send_config_from_file()
- B. send_config()
- C. send_config_set()
- D. send_control_from_file()
- E. send_command()
Answer: C,E
NEW QUESTION 52
Which two statements are benefits of YANG-push telemetry data over traditional data collection methods?
(Choose two.)
- A. The subscription requests use less bandwidth than SNMP polls.
- B. You can precisely define data subscriptions.
- C. It uses UDP rather than TCP.
- D. It scales better than SNMP.
- E. It is supported on more devices than SNMP.
Answer: A,B
NEW QUESTION 53
Drag and drop the code from the bottom onto the box where the code is missing to complete this API request against the Cisco SD-WAN vManage Statistics API, which specifies a device with an Id of 100faff9-8b36-4312-bf97-743b26bd0211, a local color of biz-internet, and a remote color of gold. Not all options are used.
Answer:
Explanation:
NEW QUESTION 54
Refer to the exhibit.
Which type of YANG container is described by the JSON instance provided?
- A. interface-name
- B. active
- C. description
- D. interface-configurations
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-0/programmability/configuration/guide/b-programmability-cg-asr9000-70x/b-programmability-cg-asr9000-70x_chapter_011.html
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r7-0/programmability/configuration/guide/b-programmability-cg-asr9000-70x/b-programmability-cg-asr9000-70x_chapter_011.html
NEW QUESTION 55
When working with MV Sense APIs, which type of protocol is MQTT based upon?
- A. publish-subscribe messaging protocol
- B. heavyweight messaging protocol
- C. computer vision protocol
- D. simple mail transport protocol
Answer: A
Explanation:
Reference:
https://internetofthingsagenda.techtarget.com/definition/MQTT-MQ-Telemetry-Transport
NEW QUESTION 56
An engineer needs to create a new network using the Meraki API. Which HTTP action to the URL https:// api.meraki.com/api/v0/organizations/<new_org_id>/networks will result in a 201 response code?
- A. POST
- B. GET
- C. ADD
- D. PUT
Answer: A
NEW QUESTION 57
What are two characteristics of synchronous calls to APIs? (Choose two.)
- A. They can be used only with certain programming languages.
- B. They make your application less portable, so asynchronous calls are preferred.
- C. They block until a response is returned from the servers.
- D. They can add perceived latency to your application if data is not received.
- E. They do not block while waiting for the API to be processed.
Answer: D,E
Explanation:
Section: Network Programmability Foundation
Explanation/Reference: https://docs.cloudmgmt.cisco.com/display/40API/Synchronous+and+Asynchronous+APIs
NEW QUESTION 58
A new project called "device_status" must be stored in a central Git repository called "device_status" with the first file named "device_status.py". The Git repository is created using the account python_programmer. Which set of commands inserts the project into Git?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION 59
......
Verified 300-435 Exam Dumps Q&As - Provide 300-435 with Correct Answers: https://www.passcollection.com/300-435_real-exams.html
300-435 Exam Questions | Real 300-435 Practice Dumps: https://drive.google.com/open?id=1MBTX2GpwMSbWx3X1zjMpvgP2gwfiN09Z
