[Oct 15, 2025] D-PDD-DY-23 Exam Dumps PDF Updated Dump from PassCollection Guaranteed Success
Pass Your EMC Exam with D-PDD-DY-23 Exam Dumps
EMC D-PDD-DY-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 38
A backup administrator needs to retrieve an encrypted file that is in Azure Blob Storage. To retrieve the file, what must the administrator do first?
- A. Decrypt the file on the cloud tier
- B. Recall the file to the cloud tier
- C. Decrypt the file in Azure Blob Storage
- D. Delete the file in Azure Blog Storage
Answer: B
NEW QUESTION # 39
Task 6
A backup administrator finished installing a PowerProtect DD3300. After the installation, they notice disk 1.5 is offline after running the disk fail command in the DDOS CLI.
Using the simulator, flash an LED on the hard drive with the issue and return it to operation.
When you have finished, continue to the next question.
Answer:
Explanation:
See the solution in the explanation below.
Explanation:
To flash an LED on a hard drive and bring a disk back online using the DD System Manager or DDOS CLI, follow these general steps:
Step 1: Identify the Disk
* In DD System Manager:
* Go to the Hardware section in the sidebar.
* Locate the list of disks, and find Disk 1.5 (the offline disk).
* In DDOS CLI (if using CLI):
* Use the command to list disks and confirm the status of Disk 1.5.
* Command example: disk show state or disk show summary.
Step 2: Flash the LED on the Disk
* In DD System Manager:
* In the Hardware section, select Disk 1.5.
* Look for an option like Flash LED or Locate Drive to help identify the physical disk.
* Activate the LED flash to identify the disk physically.
* In DDOS CLI:
* Use the command: disk locate 1.5 to flash the LED for Disk 1.5.
Step 3: Bring the Disk Back Online
* In DD System Manager:
* After identifying the disk, check for options to Bring Online or Reactivate Disk 1.5.
* Select the option to return the disk to operation.
* In DDOS CLI:
* Use the command: disk unfail 1.5 to bring the disk back online.
Step 4: Verify the Disk Status
* Confirm in DD System Manager or by using the disk show state command in CLI that Disk 1.5 is now online and functioning.
After completing these steps, the LED should flash to help locate the disk physically, and then Disk 1.5 will be returned to an operational state. Let me know if you need further guidance!
A screenshot of a computer Description automatically generated
NEW QUESTION # 40
Refer to the exhibit.
To which shelf and port should SAS HBA slot 1 port B be connected?
- A. Shelf 04 BE
- B. Shelf 01 BH
- C. Shelf 04 BH
- D. Shelf 01 BE
Answer: A
Explanation:
Based on the configuration:
SAS HBA Slot 1 has ports labeled A and B.
The connection sequence suggests that:
Shelf 01 is the first shelf connected, and it has ports BE and BH.
Shelf 02 through Shelf 04 continues the pattern with their respective ports.
Given the layout:
SAS HBA Slot 1 Port B should be connected to Shelf 01 BH to maintain proper connectivity according to the configuration flow.
NEW QUESTION # 41
By default, when is the autosupport report sent out by the PowerProtect DD system?
- A. Every Tuesday at 6 AM
- B. Every Tuesday at 8 AM
- C. Every Day at 6 AM
- D. Every Day at 8 AM
Answer: C
NEW QUESTION # 42
An administrator has observed degraded read and write throughput performance with their CIFS share.
What can the administrator disable to address the issue?
- A. TCP window size
- B. Restrict anonymous connection
- C. Log level
- D. Server Signing
Answer: D
NEW QUESTION # 43
Task 5
Use the simulator to configure a new MTree with a path of /data/col1/oracle. The MTree size must not be allowed to exceed 200 TiB.
When you have finished, continue to the next question.
Answer:
Explanation:
See the solution in the explanation below.
Explanation:
To configure a new MTree with a specified path and size limit in PowerProtect DD, follow these steps:
Step 1: Access the MTree Management Section
* In the DD System Manager interface, locate Data Management in the sidebar.
* Select MTree from the dropdown menu to manage MTrees.
Step 2: Create a New MTree
* Click on Create MTree or Add MTree (the exact button label may vary).
* Set the Path for the MTree as /data/col1/oracle.
Step 3: Set the MTree Size Limit
* In the MTree creation dialog, look for an option to set a Quota or Size Limit for the MTree.
* Set the Size Limit to 200 TiB to ensure the MTree does not exceed this capacity.
Step 4: Save the Configuration
* Confirm and save your settings to create the MTree with the specified path and size restriction.
After these steps, you should have a new MTree at /data/col1/oracle with a maximum allowed size of 200 TiB. Let me know if further assistance is required!
A screenshot of a computer Description automatically generated
NEW QUESTION # 44
What would the log view command display if no log name is specified?
- A. audit.log
- B. space.log
- C. debug/ddfs.info
- D. messages
Answer: D
NEW QUESTION # 45
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?
- A. HTTPS
- B. SSH
- C. FTP
- D. SSL
Answer: A
NEW QUESTION # 46
Which feature helps to ensure that data immutability is maintained on a PowerProtect DD system?
- A. Secure Multi-Tenancy
- B. DD Replicator
- C. DD Retention Lock
- D. Encryption
Answer: C
Explanation:
Explanation: DD Retention Lock enforces data immutability, ensuring that critical data cannot be altered or deleted until its retention period expires. This feature is essential for regulatory compliance and data integrity in long-term storage.
NEW QUESTION # 47
A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible.
What is causing these drives to be inaccessible?
- A. The capacity license applied is only for 30 drives.
- B. There are not enough cache drives on the DD9400 to support the extra capacity.
- C. A second SAS connection from DD9400 to DS60 is not activated.
- D. There are not enough spare drives.
Answer: A
NEW QUESTION # 48
A PowerProtect administrator wants to enable encryption on one of two existing cloud units.
Which statement is true regarding the encryption?
- A. Encryption license is not required to enable cloud tier encryption
- B. Active tier encryption is required to enable encryption on the cloud tier
- C. Once data is in the cloud you cannot change the encryption status
- D. Cloud tier encryption is provided only by the cloud storage
- E. Encryption can be enabled on each cloud unit individually
Answer: E
NEW QUESTION # 49
What is the maximum number of ES40 SAS shelves that can be added to a PowerProtect DD system with an existing DS60 shelf?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation: When a DS60 shelf is already part of the configuration, a maximum of 5 ES40 SAS shelves can be added to maintain balance and prevent overloading the system's data handling capabilities. This limit ensures optimal performance and reliability.
NEW QUESTION # 50
Which are two attributes of PowerProtect DD High Availability? (Select 2)
- A. PowerProtect DD nodes are configured in active/active mode.
- B. It is supported only on DD9900 systems.
- C. PowerProtect DD nodes should have dual heads.
- D. A single set of shared storage is used.
Answer: B,D
Explanation:
Explanation: PowerProtect DD High Availability configurations are supported on the DD9900 model with a single set of shared storage, ensuring redundancy and failover capabilities, critical for enterprise-level data protection environments.
PowerProtect DD High Availability (HA) configuration provides a continuous availability solution, particularly suited for DD9900 systems. Here are the two key attributes of DD HA:
* Single Set of Shared Storage: In the HA configuration, both nodes in the active/standby configuration share the same set of storage. This shared storage ensures that if the active node fails, the standby node can take over without data loss, accessing the same storage seamlessly.
* Supported Only on DD9900 Systems: The HA feature is exclusive to high-end PowerProtect DD models, specifically the DD9900. This limitation is due to the hardware requirements needed to support the robust failover and data redundancy capabilities inherent in an HA setup.
NEW QUESTION # 51
What is the correct order for the DDOS Deduplication process?
- A. Filter, Compress, Segment, and Fingerprint
- B. Fingerprint, Segment, Filter, and Compress
- C. Segment, Fingerprint, Filter, and Compress
- D. Compress, Filter, Fingerprint, and Segment
Answer: C
NEW QUESTION # 52
What is the maximum number of cloud units that Cloud Tier consists of to enable multiple cloud providers per protection system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
In a PowerProtect DD environment, Cloud Tier allows the integration of multiple cloud providers to optimize data storage and management. By supporting up to three cloud units, administrators can leverage various cloud services for backup and storage, enhancing flexibility and resource allocation while maintaining efficient data protection strategies.
NEW QUESTION # 53
How are the slots identified on a PowerProtect DD DS60 storage shelf?
- A. Columns of 10 (0 through 9)
Rows of six (A through F) - B. Columns of 10 (1 through 10)
Rows of six (A through F) - C. Columns of 12 (0 through 11)
Rows of five (A through E) - D. Columns of 12 (1 through 12)
Rows of five (A through E)
Answer: A
Explanation:
In the DS60 storage shelf, slots are organized into columns and rows for easy identification. The columns are numbered from 0 to 9, indicating 10 slots in total, while the rows are labeled from A to F, indicating 6 rows.
This identification scheme helps administrators manage and organize the physical components of the storage system effectively.
NEW QUESTION # 54
Which command is used to add storage to either the active or cloud tier?
- A. storage add enclosure
- B. storage add cloud
- C. storage add disks
- D. enclosure add storage
Answer: C
Explanation:
Explanation: To add storage to either the active or cloud tier on a PowerProtect DD appliance, the command storage add disks is used. This command allows the administrator to add physical disks to expand storage capacity. By adding disks to the system, administrators can increase the available storage within the specified tier, whether it's for active (local) storage or cloud-integrated storage. This flexibility supports growth and scalability in data management operations.
NEW QUESTION # 55
......
New Real D-PDD-DY-23 Exam Dumps Questions: https://www.passcollection.com/D-PDD-DY-23_real-exams.html
D-PDD-DY-23 Exam Dumps - EMC Practice Test Questions: https://drive.google.com/open?id=1NYYXXSJRmUMcV4LQSEqG2ukU2cxW4VOW
