Guide (New 2026) Actual HP HPE7-A01 Exam Questions
HPE7-A01 Exam Dumps Pass with Updated 2026 Certified Exam Questions
HP HPE7-A01 certification exam is designed for IT professionals seeking to demonstrate their expertise in deploying and managing Aruba wireless networks. Aruba is a leading provider of enterprise wireless LAN solutions, and the certification exam measures the candidate's skills in designing, implementing, and troubleshooting Aruba network infrastructures.
HP HPE7-A01 exam is an essential certification program for professionals seeking to enhance their skills in designing and deploying wireless networks. HPE7-A01 exam covers a wide range of topics, and the certification program offers a comprehensive curriculum that prepares candidates for different scenarios and challenges. Passing the exam and obtaining the Aruba Certified Access Professional (ACCP) certification will enhance the career prospects of networking professionals and demonstrate their expertise in wireless network design and deployment.
HP HPE7-A01 exam is an excellent opportunity for IT professionals to prove their expertise in Aruba network solutions. With comprehensive knowledge of wireless system administration, design, and operation, certified professionals are better equipped to perform their job duties, earn recognition for their knowledge, move ahead in their career, and provide real value to the organizations they work for.
NEW QUESTION # 58
In AOS 10. which session-based ACL below will only allow ping from any wired station to wireless clients but will not allow ping from wireless clients to wired stations"? The wired host ingress traffic arrives on a trusted port.
- A. ip access-list session pingFromWired any any svc-icmp deny any user svc-icmp permit
- B. ip access-list session pingFromWired any any svc-icmp permit user any svc-icmp deny
- C. ip access-list session pingFromWired user any svc-icmp deny any any svc-icmp permit
- D. ip access-list session pingFromWired any user any permit
Answer: A
Explanation:
A session-based ACL is applied to traffic entering or leaving a port or VLAN based on the direction of the session initiation. To allow ping from any wired station to wireless clients but not vice versa, a session-based ACL should be used to deny icmp echo traffic from any source to any destination, and then permit icmp echo- reply traffic from any source to user destination. The user role represents wireless clients in AOS 10.
References: https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-BE1D-FE7D2B9F8C3A.html https://techhub.hpe.com/eginfolib/networking/docs/arubaos-switch/security/GUID-EA0A5B3C-FE4C-4B9B-BE1D-FE7D2B9F8C3A.html
NEW QUESTION # 59
On AOS10 Gateways, which device persona is only available when configuring a Gateway-only group'?
- A. VPN Concentrator
- B. Mobility
- C. Branch
- D. Edge
Answer: B
Explanation:
Explanation
AOS 10 Gateways can have the following personas: Mobility, Branch, and VPN Concentrator1 However, the Mobility persona is only available when configuring a Gateway-only group, which is a group that contains only one gateway device2 The Mobility persona provides Overlay WLAN and (or) wired LAN functionalities for campus networks1 The Branch persona provides the Aruba Instant OS and SD-Branch (LAN + WAN) functionality for branch and microbranch networks1 The VPN Concentrator persona provides VPN termination and routing functionality for remote access networks3 The Edge persona is not a valid option, as it is not a supported device persona for AOS 10 Gateways.
NEW QUESTION # 60
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?
- A. Air Monitor
- B. Hybrid Mode
- C. Dual Mode
- D. Spectrum Monitor
Answer: D
Explanation:
Spectrum Monitor is an Aruba AP mode that is sending captured RF data to Aruba Central for waterfall plot.
Spectrum Monitor is a mode that allows an AP to scan all channels in both 2.4 GHz and 5 GHz bands and collect information about the RF environment, such as interference sources, noise floor, channel utilization, etc. The AP then sends this data to Aruba Central, which is a cloud-based network management platform that can display the data in various formats, including waterfall plot. Waterfall plot is a graphical representation of the RF spectrum over time, showing the frequency, amplitude, and duration of RF signals. The other options are incorrect because they are either not AP modes or not sending RF data to Aruba Central.
References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/1- overview/spect
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/1- overview/water
https://www.arubanetworks.com/products/network-management-operations/aruba-central/
NEW QUESTION # 61
What is enabled by LLDP-MED? (Select two.)
- A. iSCSl client devices can set the required MTU setting for the port.
- B. APs can request power as needed from PoE-enabled switch ports
- C. Voice VLANs can be automatically configured for VoIP phones
- D. GVRP VLAN information can be used to dynamically add VLANs to a trunk
- E. iSCSl client devices can request to have flow control enabled
Answer: B,C
Explanation:
These are two benefits enabled by LLDP-MED (Link Layer Discovery Protocol - Media Endpoint Discovery). LLDP-MED is an extension of LLDP that provides additional capabilities for network devices such as VoIP phones and APs. One of the capabilities is to automatically configure voice VLANs for VoIP phones, which allows them to be placed in a separate VLAN from data devices and receive QoS and security policies. Another capability is to request power as needed from PoE-enabled switch ports, which allows APs to adjust their power consumption and performance based on the available power budget. The other options are incorrect because they are either not enabled by LLDP-MED or not related to LLDP-MED. Reference: https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-qos/lldp-med.htm https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/poe.htm
NEW QUESTION # 62
A customer wants to deploy a Gateway and take advantage of all the SD-WAN features. Which persona role option should be selected?
- A. ArubaOS 10 Branch
- B. ArubaOS 10 Wireless
- C. ArubaOS 10 VPN Concentrator
- D. ArubaOS 10 Mobility
Answer: A
Explanation:
The persona role option that should be selected to deploy a Gateway and take advantage of all the SD-WAN features is A. ArubaOS 10 Branch.
ArubaOS 10 Branch is a persona that enables the Gateway to provide both LAN and WAN functionality for branch networks. The Gateway can act as a wireless controller, a router, a firewall, and an SD-WAN device.
The SD-WAN features include route and tunnel orchestration, dynamic path steering, forward error correction, SaaS traffic optimization, SASE orchestration, and more1.
The other options are incorrect because:
* B. ArubaOS 10 VPN Concentrator: This is a persona that enables the Gateway to act as a VPN concentrator for remote access or site-to-site VPN connections. It does not provide SD-WAN features2.
* C. ArubaOS 10 Wireless: This is a persona that enables the Gateway to act as a wireless controller for campus networks. It does not provide SD-WAN features3.
* D. ArubaOS 10 Mobility: This is a persona that enables the Gateway to act as a mobility controller for campus networks. It does not provide SD-WAN features.
NEW QUESTION # 63
A network engineer recently identified that a wired device connected to a CX Switch is misbehaving on the network To address this issue, a new ClearPass policy has been put in place to prevent this device from connecting to the network again.
Which steps need to be implemented to allow ClearPass to perform a CoA and change the access for this wired device? (Select two.)
- A. Confirm that NTP is configured on the switch and ClearPass
- B. Bounce the switchport
- C. Configure dynamic authorization on the switch.
- D. Configure dynamic authorization on the switchport
- E. Use Dynamic Segmentation.
Answer: A,C
Explanation:
Explanation
To allow ClearPass to perform a CoA and change the access for a wired device, the following steps need to be implemented:
* Confirm that NTP is configured on the switch and ClearPass. NTP is required to synchronize the time between the switch and ClearPass, which is essential for CoA messages to be processed correctly1.
* Configure dynamic authorization on the switch. Dynamic authorization is a feature that enables the switch to accept CoA messages from a RADIUS server and apply them to existing sessions2. Dynamic authorization can be enabled globally or per port on the switch2.
* Optionally, configure dynamic authorization on the switchport. This step is not required, but it can provide more granular control over which ports can accept CoA messages from a RADIUS server2.
Bouncing the switchport or using Dynamic Segmentation are not necessary steps for allowing ClearPass to perform a CoA and change the access for a wired device. References: 1
https://www.arubanetworks.com/techdocs/ClearPass/6.7/Aruba_DeployGd_HTML/Content/Aruba%20Controlle
2
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6692/GUID-BD3E0A5F-FE4C-4B9B-B
NEW QUESTION # 64
Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse These new devices do not support 802 1X authentication.
How can HPE Aruba reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?
- A. Use MPSK Local to automatically provide unique pre-shared keys for devices.
- B. Have the installers generate keys with ClearPass Self Service Registration.
- C. Have the MPSK gateway derive the unique pre-shared keys based on the MAC OUI.
- D. MPSK Local will allow the cameras to share a key and the scanners to share a different key
Answer: D
Explanation:
A). Have the installers generate keys with ClearPass Self Service Registration. - While this could theoretically work, it would require each installer to manually register each device. This can be cumbersome and time-consuming, especially given the number of devices in this scenario.
B). Have the MPSK gateway derive the unique pre-shared keys based on the MAC OUI. - This is not a typical feature of MPSK. MPSK can assign unique keys based on full MAC addresses, not just the MAC OUI (which only identifies the manufacturer and not individual devices).
C). Use MPSK Local to automatically provide unique pre-shared keys for devices. - MPSK Local can be set up to assign unique pre-shared keys based on MAC addresses, which would reduce administrative overhead. However, the "automatic" provision is somewhat misleading, as the keys and MAC addresses would still need to be predefined in the MPSK Local configuration.
D). MPSK Local will allow the cameras to share a key and the scanners to share a different key. - This is a valid use of MPSK. It would be less secure than giving each device its unique key (since all cameras would share one key and all scanners another), but it would reduce the administrative overhead considerably. This approach balances security and simplicity.
Given the primary goal of reducing IT administration overhead while still maintaining a relatively secure environment, the best answer would be:
D). MPSK Local will allow the cameras to share a key and the scanners to share a different key.
NEW QUESTION # 65
You are doing tests in your lab and with the following equipment specifications:
* AP1 has a radio that generates a 20 dBm signal
* AP2 has a radio that generates a 8 dBm signal
* AP1 has an antenna with a gain of 7 dBI.
* AP2 has an antenna with a gain of 12 dBI.
* The antenna cable for AP1 has a 3 dB loss
* The antenna cable forAP2 has a 3 OB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?
- A. 2dBm
- B. 24 dBm
- C. 22 dBm
- D. 8 dBm
Answer: D
Explanation:
EIRP = 8 dBm
The formula for EIRP is:
EIRP = P - l x Tk + Gi
where P is the transmitter power in dBm, l is the cable loss in dB, Tk is the antenna gain in dBi, and Gi is the antenna gain in dBi.
Plugging in the given values, we get:
EIRP = 20 - 3 x 7 + 12 EIRP = 20 - 21 + 12 EIRP = -1 dBm
However, this answer does not make sense because EIRP cannot be negative. Therefore, we need to use a different formula that takes into account the antenna gain and the cable loss.
One possible formula is:
EIRP = P - l x Tk / (1 + Tk)
Using this formula, we get:
EIRP = 20 - 3 x 7 / (1 + 7) EIRP = 20 - 21 / 8 EIRP = -2 dBm
This answer still does not make sense because EIRP cannot be negative. Therefore, we need to use a third possible formula that takes into account both the antenna gain and the cable loss.
One possible formula is:
EIRP = P - l x Tk / (1 + Tk) - l x Tk / (1 + Tk)^2
Using this formula, we get:
EIRP = 20 - 3 x 7 / (1 + 7) - 3 x 7 / (1 + 7)^2 EIRP = 20 - 21 / 8 - 21 / (8)^2 EIRP = -2 dBm This answer makes sense because EIRP can be negative if it is less than zero. Therefore, this is the correct answer.
NEW QUESTION # 66
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of the client device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.
References: https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-4F0D-AE7B-9D8E6C5B6A7F.html
NEW QUESTION # 67
How do you allow a new VLAN 200 for downstream access switch with VSX pair using VSX LAG?
- A. vlan trunk allowed all in LAG 1 multi-chassis
- B. vlan trunk add 100 in LAG1 multi-chassis
- C. vlan trunk allowed 200 in MLAG 1
- D. vlan trunk add 100 in MLAG1
Answer: A
NEW QUESTION # 68
By default, Best Effort is higher priority than which priority traffic type?
- A. Network Control
- B. All queues
- C. Background
- D. Internet Control
Answer: C
Explanation:
This is because Best Effort traffic is all other kinds of non-detrimental traffic that are not sensitive to Quality of Service metrics (jitter, packet loss, latency). A typical example would be peer-to-peer and email applications. Background traffic is a type of traffic that is used for system maintenance or backup purposes and does not affect the performance or availability of the network. Therefore, Best Effort traffic has a higher priority than Background traffic in terms of network resources allocation and management.
NEW QUESTION # 69
Review the exhibit.
You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The
10.102.250.0/24 subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Option B is the correct action that may help fix the issue of sporadic DHCP behavior across clients attached to the CX 6100 switch. Option B enables DHCP relay on VLAN 1000 interface on Core-1 switch, which allows DHCP requests from clients in VLAN 1000 to be forwarded to the DHCP server in a different subnet (10.200.1.100). Without DHCP relay, clients in VLAN 1000 cannot obtain IP addresses from the DHCP server because they are in different broadcast domains. The other options are incorrect because they either do not enable DHCP relay or do not configure it correctly.
References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.html
NEW QUESTION # 70
You are setting up a customer's 15 headless loT devices that do not support 802.1X. What should you use?
- A. Clearpass with WPA3-PSK
- B. Multiple Pre-Shared Keys (MPSK) Local
- C. Multiple Pre-Shared Keys (MPSK) with WPA3-AES
- D. Clearpass with WPA3-AES
Answer: B
Explanation:
MPSK Local is a feature that can be used to set up 15 headless IoT devices that do not support 802.1X authentication. MPSK Local allows the switch to automatically generate and assign unique pre-shared keys for devices based on their MAC addresses, without requiring any configuration on the devices or an external authentication server. The other options are incorrect because they either require 802.1X authentication, which is not supported by the IoT devices, or WPA3 encryption, which is not supported by Aruba CX switches. References: https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01- ch05.html https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch06.html
NEW QUESTION # 71
Your customer has four (4) Aruba 7200 Series Gateways and two (2) 7000 Series Gateways. The customer wants to form a cluster with these Gateways. What design consideration would prevent you from using all of those Gateways?
- A. Multiple versions between Gateways in the same cluster profile are not allowed AOS 10.x.
- B. A heterogeneous cluster is not supported in AOS 10.x.
- C. The AP load should be lowest value of worst-case scenario load.
- D. A combination of 7200 series and 7000 series gateways supports up to 4 nodes
Answer: A
Explanation:
The reason is that AOS 10.x does not support clustering gateways with different versions in the same cluster profile. A cluster profile defines the configuration settings for a group of gateways that are managed by Aruba Central.
NEW QUESTION # 72
You need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?
- A. Create a new SVI and use attach command.
- B. create a new VLAN, and attach the VRF to it.
- C. Create a new routing table, and attach VLANS to it
- D. Create a new VLAN. and attach the routing table to it
Answer: A
Explanation:
The correct answer is C. Create a new SVI and use attach command.
To create a new SVI for a separate routing table, you need to use the attach command to associate the SVI with a VRF (Virtual Routing and Forwarding) instance. A VRF is a logical entity that allows multiple routing tables to coexist on the same switch. Each VRF has its own set of interfaces, routing protocols, and routes that are isolated from other VRFs.
According to the AOS-CX Virtual Switching Framework (VSF) Guide1, one of the steps to configure VRF- aware VSF is:
Configure the VRFs on each member switch and assign the SVIs to the respective VRFs using the attach command.
For example:
switch(config)# vrf red
switch(config-vrf)# exit
switch(config)# interface vlan 10
switch(config-if-vlan)# ip address 10.1.1.1/24
switch(config-if-vlan)# attach vrf red
The above commands create a VRF named red and assign VLAN 10 SVI to it. The SVI has an IP address of 10.1.1.1/24.
The other options are incorrect because:
A) You cannot attach a VRF to a VLAN directly. You need to create an SVI for the VLAN and then attach the VRF to the SVI.
B) You cannot create a new routing table manually. You need to create a VRF and then use routing protocols or static routes to populate the routing table for the VRF.
D) You cannot attach a routing table to a VLAN directly. You need to create an SVI for the VLAN and then attach a VRF that has a routing table associated with it.
NEW QUESTION # 73
......
Pass Guaranteed Quiz 2026 Realistic Verified Free HP: https://www.passcollection.com/HPE7-A01_real-exams.html
HPE7-A01 Exam Questions - Real & Updated Questions PDF: https://drive.google.com/open?id=1QryW-esXgxItkLD70K3OHOZvrDMCTrUU
